Messages in this thread |  | | | Date | Tue, 23 Jan 2001 09:28:34 -0800 (PST) | | From | Andre Hedrick <> | | Subject | Re: VIA chipset discussion |
| |
On Sat, 20 Jan 2001, Andy Galasso wrote:
> I'm not sure how relevant it is, but FWIW here's what I've got: > > MSI 694D Pro Motherboard 2xPIII-800 100MHz FSB > Linux-2.4.0-prerelease SMP > Promise FastTrak100 controller card > 4 IBM DTLA-307030 drives attached to Promise card > boot params: ide2=0xac00 ide3=0xb400
DON'T the above silly "ide2=0xac00 ide3=0xb400"!
> hde: probing with STATUS(0x50) instead of ALTSTATUS(0xff) > hdf: probing with STATUS(0x50) instead of ALTSTATUS(0xff) > hdg: probing with STATUS(0x50) instead of ALTSTATUS(0xff) > hdh: probing with STATUS(0x50) instead of ALTSTATUS(0xff)
You have no altstatus register because of using 2.2 crippled access on 2.4 fully enabled.
> ide1 at 0x170-0x177,0x376 on irq 15 > ide2 at 0xac00-0xac07,0xae06 on irq 16 > ide3 at 0xb400-0xb407,0xb606 on irq 16 (shared with ide2)
You have now lost your interrupt parser in the driver :-(
> hde:hde: irq timeout: status=0x50 { DriveReady SeekComplete }
No one is to every override the driver on setting up the IO base.
Cheers,
Andre Hedrick Linux ATA Development
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
|  |