lkml.org 
[lkml]   [2001]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectHang when booting 2.4.0/2.4.1-pre8 on Compaq 1850R with SMART 3200
I'm currently experiencing difficulty booting Linux 2.4.0 on a Compaq
1850R server with a SMART 3200 controller on board.

When the SMART array is detected and the cpqarray driver is loaded,
the system hangs at the following point:

Compaq SMART2 Driver (v 2.4.1)
Found 1 controller(s)
cpqarray ida/c0d0: blksz=512 nr_blks=17764320
Partition check:
ida/c0d0:_

The partition check never starts.

I get the same results when booting 2.4.1-pre8. The system works fine
with the 2.2.x kernel series, but I need some of the functionality in
the newer 2.4.x series.

Any ideas?

Ian
--
Ian Macdonald | Inspite of all evidence to the contrary,
Senior System Administrator | the entire universe is composed of only two
Linuxcare, Inc. | basic substances: magic and bullshit.
Support for the Revolution |
|
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:13    [W:0.290 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site