lkml.org 
[lkml]   [2001]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: eth1: Transmit timed out, status 0000, PHY status 0000
On Sun, 14 Jan 2001, Mike A. Harris wrote:

> Becker's latest via-rhine driver ontop 2.2.18..
>
> ...
> eth1: Transmit timed out, status 0000, PHY status 0000,
> resetting...
[snip]
> Keeps going nonstop until I ifdown eth1.
>
> Card worked fine 2 days ago...

So what did you change?
Has the machine been up since then?


Someone else with the same symptoms (in 2.4)
http://www.uwsg.iu.edu/hypermail/linux/net/0011.0/0027.html

Becker's reply
http://www.uwsg.iu.edu/hypermail/linux/net/0011.0/0032.html

"Try unplugging the system and doing a really cold boot. A soft-off does
not reset the chip.

If this solves the problem, we will have to add code to re-load the
EEPROM info into the chip."


There is no further reply in that thread.

/Urban

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:22    [from the cache]
©2003-2011 Jasper Spaans