Messages in this thread | | | Date | Thu, 11 Jan 2001 09:46:41 -0800 (PST) | From | Andre Hedrick <> | Subject | AMD760/765 DDR Athlon testers needed.... |
| |
Calling AMD Geeks^H^H^H^H^HUsers,
I have one of these DDR boxes from AMD with the AMD760/765 cores, if you have one please let me know if you wnat to test this new code? It is only ATA66 limited and the DOCS I have do not have the ATA100 timings.
Cheers,
Andre Hedrick Linux ATA Development Inspecting /boot/System.map Symbol table has incorrect version number.
Cannot find map file. No module symbols loaded. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.2.19pre7 (root@3ware) (gcc version 2.95.2 19991024 (release)) #1 Wed Jan 10 15:33:37 PST 2001 <4>USER-provided physical RAM map: <4> USER: 0009f000 @ 00000000 (usable) <4> USER: 07e00000 @ 00100000 (usable) <4>Detected 995570 kHz processor. <4>ide_setup: idebus=33 <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 1985.74 BogoMIPS <4>Memory: 126752k/130048k available (1232k kernel code, 416k reserved, 1584k data, 64k init) <4>Dentry hash table entries: 16384 (order 5, 128k) <4>Buffer cache hash table entries: 131072 (order 7, 512k) <4>Page cache hash table entries: 32768 (order 5, 128k) <5>VFS: Diskquotas version dquot_6.4.0 initialized <4>CPU: L1 I Cache: 64K L1 D Cache: 64K <4>CPU: L2 Cache: 256K <4>CPU: AMD Athlon(tm) Processor stepping 02 <6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) <4>PCI: PCI BIOS revision 2.10 entry at 0xfb100 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <4>PCI: Enabling I/O for device 00:00 <6>Linux NET4.0 for Linux 2.2 <6>Based upon Swansea University Computer Society NET3.039 <6>NET4: Unix domain sockets 1.0 for Linux NET4.0. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP <4>TCP: Hash tables configured (ehash 131072 bhash 65536) <4>Initializing RT netlink socket <4>Starting kswapd v 1.5 <6>parport0: PC-style at 0x378 [SPP,PS2] <6>Detected PS/2 Mouse Port. <6>Serial driver version 4.27 with SHARE_IRQ enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS02 at 0x03e8 (irq = 4) is a 16550A <4>pty: 256 Unix98 ptys configured <6>lp0: using parport0 (polling). <4>Software Watchdog Timer: 0.05, timer margin: 60 sec <6>Real Time Clock Driver v1.09 <6>Non-volatile memory driver v1.0a <4>RAM disk driver initialized: 16 RAM disks of 4096K size <6>loop: registered device at major 7 <6>Uniform Multi-Platform E-IDE driver Revision: 6.30 <4>ide: Assuming 33MHz system bus speed for PIO modes <4>AMD7411: IDE controller on PCI bus 00 dev 39 <4>AMD7411: chipset revision 1 <4>AMD7411: not 100% native mode: will probe irqs later <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA <4>PDC20267: IDE controller on PCI bus 00 dev 58 <4>PDC20267: chipset revision 2 <4>PDC20267: not 100% native mode: will probe irqs later <4>PDC20267: ROM enabled at 0xe7000000 <4>PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. <4> ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:DMA, hdf:pio <4> ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:DMA, hdh:pio <4>hda: QUANTUM FIREBALL CX13.0A, ATA DISK drive <4>hdb: QUANTUM FIREBALL CR4.3A, ATA DISK drive <4>hdc: ATAPI CD ROM DRIVE 50X MAX, ATAPI CDROM drive <4>hdd: HITACHI DVD-RAM GF-2000, ATAPI CDROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: TF.1=x00 TF.2=x00 TF.3=x00 TF.4=x00 TF.5=x00 TF.6=x40 TF.7=xf8 <6>hda: QUANTUM FIREBALL CX13.0A, 12416MB w/418kB Cache, CHS=25228/16/63, UDMA(33) <4>hdb: TF.1=x00 TF.2=x00 TF.3=x00 TF.4=x00 TF.5=x00 TF.6=x40 TF.7=xf8 <6>hdb: QUANTUM FIREBALL CR4.3A, 4110MB w/418kB Cache, CHS=14848/9/63, UDMA(66) <4>hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.11 <4>hdd: ATAPI DVD-ROM DVD-R drive, 512kB Cache, UDMA(33) <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov <6>eth0: Lite-On 82c168 PNIC rev 32 at 0xd400, 00:A0:CC:56:C0:6B, IRQ 10. <6>eth0: MII transceiver #1 config 3000 status 7829 advertising 01e1. <6>Partition check: <6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 > <6> hdb: hdb1 <4>VFS: Mounted root (ext2 filesystem) readonly. <4>Freeing unused kernel memory: 64k freed Kernel logging (ksyslog) stopped. Kernel log daemon terminating.
| |