Messages in this thread | | | Date | Fri, 11 Aug 2000 00:02:56 -0700 | From | Miles Lane <> | Subject | 2.4.0-test6 -- Problem with PCI -- Error while updating region 01:00.0/1 (10800000 != 00000000) |
| |
I am including the dmesg output and "lspci -vv" output.
PCI: Enabling device 00:04.0 (0000 -> 0002) PCI: Assigned IRQ 11 for device 00:04.0 PCI: Enabling device 00:04.1 (0000 -> 0002) PCI: Assigned IRQ 11 for device 00:04.1 Yenta IRQ list 0298, PCI irq11 Socket status: 30000020 Yenta IRQ list 0298, PCI irq11 Socket status: 30000059 usb.c: registered new driver hid mice: PS/2 mouse device common for all mice usb.c: registered new driver usb-storage USB Mass Storage support registered. cs: cb_alloc(bus 1): vendor 0x1045, device 0xc861 PCI: Error while updating region 01:00.0/1 (10800000 != 00000000) PCI: Enabling device 01:00.0 (0000 -> 0002) PCI: Found IRQ 11 for device 01:00.0 PCI: The same IRQ used for device 00:04.0 PCI: Setting latency timer of device 01:00.0 to 64 usb-ohci.c: USB OHCI at membase 0xc5804000, IRQ 11 usb-ohci.c: usb-01:00.0, PCI device 1045:c861 usb-ohci.c: USB HC TakeOver failed! usb.c: USB bus -1 deregistered
"lspci -vv" gives me the following:
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (AGP disabled) (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 64 set Region 0: Memory at <unassigned> (32-bit, prefetchable) [size=64M]
00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 007e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 min, 255 max, 128 set Interrupt: pin A routed to IRQ 0 Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at fea00000 (32-bit, non-prefetchable) [size=2M] Region 2: Memory at fed00000 (32-bit, non-prefetchable) [size=1M]
00:04.0 CardBus bridge: Texas Instruments PCI1131 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 007e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 set, cache line size 20 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001
00:04.1 CardBus bridge: Texas Instruments PCI1131 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 007e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 set, cache line size 20 Interrupt: pin B routed to IRQ 11 Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=03, subordinate=03, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 set Region 4: I/O ports at fcf0 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at fcc0 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
01:00.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI]) Subsystem: OPTi Inc.: Unknown device c861 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 set Interrupt: pin A routed to IRQ 11 Region 0: [virtual] Memory at 10800000 (32-bit, non-prefetchable) [size=4K]
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |