Messages in this thread | | | Date | Thu, 6 Jul 2000 16:30:22 -0700 | From | Jens Taprogge <> | Subject | Slight PCMCIA improvement with 2.4.0-test3pre4 |
| |
I have found a slight improvement with 2.4.0test3pre4: My modem card seems to be working fine now. My D-Link DE-660 still isn't:
It says that it does not get therequested irq. I also found that cardmgr complains about not finding 8390.o.
All PCMCIA drivers are compiled into the kernel. I am using cardmgr version 3.1.11.
Attached are the output of dmesg and an etract from my logfiles. If you would like more info, please let me know
Jens
-- Jens Taprogge
e-mail:taprogge@idg.rwth-aachen.de icq: 18040768
Linux version 2.4.0-test3 (root@al) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #5 Thu Jul 6 09:43:07 PDT 2000 BIOS-provided physical RAM map: e820: 000000000009fc00 @ 0000000000000000 (usable) e820: 0000000000000400 @ 000000000009fc00 (reserved) e820: 0000000000004000 @ 00000000000e8000 (reserved) e820: 0000000000010000 @ 00000000000f0000 (reserved) e820: 0000000005ef0000 @ 0000000000100000 (usable) e820: 0000000000010000 @ 0000000005ff0000 (ACPI data) e820: 0000000000016e00 @ 00000000100a0000 (reserved) e820: 0000000000000200 @ 00000000100b6e00 (ACPI NVS) e820: 0000000000049000 @ 00000000100b7000 (reserved) e820: 0000000000080000 @ 00000000fff80000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 4096 bytes. On node 0 totalpages: 24576 zone(0): 4096 pages. zone(1): 20480 pages. zone(2): 0 pages. mapped APIC to ffffe000 (011b2000) Kernel command line: BOOT_IMAGE=4 root=302 BOOT_FILE=/boot/vmlinuz mem=96M; parport=0x378,auto; video=vesa; pci=biosirq Initializing CPU#0 Detected 233298043 Hz processor. Console: colour dummy device 80x25 Calibrating delay loop... 465.31 BogoMIPS Memory: 93892k/98304k available (1714k kernel code, 4024k reserved, 120k data, 212k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) kmem_create: Poisoning requested, but con given - bdev_cache Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) kmem_create: Poisoning requested, but con given - inode_cache CPU: Intel Pentium II (Deschutes) stepping 00 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xf1927, last bus=21 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/122e] at 00:07.0 PCI: Found IRQ 11 for device 00:02.0 PCI: Found IRQ 11 for device 00:02.1 PCI: Cannot allocate resource region 4 of device 00:07.1 Limiting direct PCI/PCI transfers. isapnp: Scanning for Pnp cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.3 Based upon Swansea University Computer Society NET3.039 kmem_create: Poisoning requested, but con given - skbuff_head_cache NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) IrDA (tm) Protocols for Linux-2.3 (Dag Brattli) get_random_bytes called before random driver initialization get_random_bytes called before random driver initialization get_random_bytes called before random driver initialization IrCOMM protocol (Dag Brattli) P6 Microcode Update Driver v1.05 registered apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13) Starting kswapd v1.6 kmem_create: Poisoning requested, but con given - file lock cache 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 8 0x378: readIntrThreshold is 8 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x4b 0x378: ECP settings irq=7 dma=3 parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) vesafb: framebuffer at 0xfe000000, mapped to 0xc6800000, size 2048k vesafb: mode is 800x600x8, linelength=800, pages=0 vesafb: protected mode interface info at c000:96e0 vesafb: scrolling: redraw Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured lp0: using parport0 (interrupt-driven). Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK4006MAV, ATA DISK drive hdc: CD-224E, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 8007552 sectors (4100 MB), CHS=993/128/63, UDMA(33) hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.11 Partition check: hda: hda1 hda2 hda3 hda4 Floppy drive(s): fd0 is 1.44M FDC 0 is an 8272A NTFS version 000607 Serial driver version 5.01 (2000-05-29) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10c PPP generic driver version 2.4.1 PPP Deflate Compression module registered Linux PCMCIA Card Services 3.1.11 options: [pci] [cardbus] [pm] Yenta IRQ list 0000, PCI irq11 Socket status: ffffffff Yenta IRQ list 0418, PCI irq11 Socket status: 30000001 Intel PCIC probe: not found. kmem_create: Forcing size word alignment - nfs_fh VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 212k freed Adding Swap: 60384k swap-space (priority -1) NET4: Linux IPX 0.38 for NET4.0 IPX Portions Copyright (c) 1995 Caldera, Inc. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. pcnet_cs: RequestIRQ: Resource in use ttyS01 at port 0x02f8 (irq = 3) is a 16550A ToshOboe: Found 701 chip at 0xff80 irq 11 IrDA: Registered device irda0 ToshOboe: Using single tasks, version $Id: toshoboe.c,v 1.91 1999/06/29 14:21:06 root Exp $ Trying to open MFT
Jul 6 16:00:10 avery-32 cardmgr[275]: starting, version is 3.1.16 Jul 6 16:00:10 avery-32 cardmgr[275]: watching 2 sockets Jul 6 16:00:10 avery-32 cardmgr[275]: Card Services release does not match Jul 6 16:00:10 avery-32 cardmgr[275]: initializing socket 0 Jul 6 16:00:10 avery-32 cardmgr[275]: socket 0: D-Link DE-660 Ethernet Jul 6 16:00:11 avery-32 cardmgr[275]: executing: 'modprobe 8390' Jul 6 16:00:11 avery-32 cardmgr[275]: + modprobe: Can't locate module 8390 Jul 6 16:00:11 avery-32 cardmgr[275]: modprobe exited with status 255 Jul 6 16:00:11 avery-32 cardmgr[275]: module /lib/modules/2.4.0-test3/pcmcia/8390.o not available
| |