lkml.org 
[lkml]   [2000]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: IDE problem (VIA82C586, kernel 2.2 and 2.4)

You have to use my patch with 2.2 or a 2.4.0x kernel.
Then you are required to set EXPERIMENTAL
CONFIG_BLK_DEV_VIA82CXXX
CONFIG_VIA_TUNING

Cheers,

On Wed, 12 Jul 2000, Anthony Barbachan wrote:

> ??? Where do you turn this on? I enable support for the VIA chipsets
> through make menuconfig in the 2.2.x kernels but never noticed a VIA_TUNING
> option. Is the the same thing? Currently I would assume so as hdparm
> appears to work for me. Also the help page for the VIA support should
> probably be updated to speak about the idebus parameter. I didn't know I
> had to use it myself until I saw you mention it on this list recently.
> Until then I assumed the eventual failure of optimizations done through
> hdparm were due to buggy VIA chipsets, FIC/shuttle motherboards, or the
> still mark experimental Linux driver. By the way for some reason on the FIC
> PAG-2130 the idebus parameter was unnecessary for the proper operation of
> the various optimizations done through hdparm.
>
> Can the idebus paramter just default to 33 now? Other than overclockers
> virtually nobody is really getting systems that diviate from a 33 Mhz bus
> nowadays.
>
> >
> > But you never stated if you turned on the VIA_TUNING.
> >
> > You may not do the hdparm line with out it.
> >
> > Cheers,
> >
> > Andre Hedrick
> > The Linux ATA/IDE guy
> >
>
>

Andre Hedrick
The Linux ATA/IDE guy


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:0.041 / U:1.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site