[lkml]   [2000]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: 3c59x & Cat 4003 Ethernet Lockups
    Luuk van der Duim wrote:
    > Mr. Mendelson,
    > Does your 3c905B share an interrupt with another device?

    /proc/pci doesn't show any conflicts, but I'm not directly in front of
    any of the machines so I can't reboot them and see what BIOS wants to
    map devices to.

    Bus 0, device 9, function 0:
    Ethernet controller: 3Com 3C905B 100bTX (rev 48).
    Medium devsel. IRQ 17. Master Capable. Latency=64. Min Gnt=10.Max
    I/O at 0xd400 [0xd401].
    Non-prefetchable 32 bit memory at 0xe8000000 [0xe8000000].

    3Com 3c90x Version 1.0.0e 1999 <>

    When Donald Becker's driver is loaded, it looks like:

    3c59x.c:v0.99H 11/17/98 Donald Becker
    eth0: 3Com 3c905B Cyclone 100baseTx at 0xd400, 00:10:5a:83:df:19, IRQ
    8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
    MII transceiver found at address 24, status 786d.
    MII transceiver found at address 0, status 786d.
    Enabling bus-master transmits and whole-frame receives.

    Jordan Mendelson
    Napster, Inc.

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:56    [W:0.023 / U:2.720 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site