Messages in this thread | | | Date | Tue, 28 Mar 2000 22:05:59 -0800 (PST) | From | Blu3Viper <> | Subject | Re: The 2.3.x Job List (Updated) |
| |
On Tue, 28 Mar 2000, Andre Hedrick wrote: > > Right at the moment I suspect most of the lost interrupt stuff is PCI/APIC > > stuff, certainly on 2.3.9x. You can't simply say 'it runs flawlessly' when > > for someone it doesn't. > > If the chipset is tuned correctly and the drive is put in the correct > transfer rate "it runs flawlessly". Even under PCI/APIC with a PIIX3 > 440FX PPro........this is with a broken MPTable, also........
Well...it's awfully hard to tune it when I can't boot because the laptop hangs on the partition check with lost interrupt and never comes back. If I disable the dma by default option, then I don't have the PIIX tuning option any more.
> The question is how are they using the device?
/dev/hda is my device. It is my ext2 filesystem.
-d
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |