lkml.org 
[lkml]   [2000]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectQ: ATAPI-CD-Writer and Parport-ZIP Together
Date
Hi folks,

I don't know how to solve the following problem.

I have 2 IDE-HDD, 1 ATAPI CDROM drive, 1 ATAPI CD/RW writer
in my computer, and I want to connect a parport-ZIP-drive.

For both ATAPI CD-drives, I'm using the SCSI-emulation, they are
now /dev/scd0 and /dev/scd1. I'm using modules, and LILO
is appended "hdc=ide-scsi hdd=ide-scsi". As long as the ZIP
dive is not connected to the parallel port, all works well,
and I can roast CD-ROMs without problems.

But when I plug in the ZIP drive and reboot the computer, then
the ide-scsi configuration is ignored and the ATAPI drives are
seen as IDE. The ppa module is loaded and ZIP works, but I am
no more able to burn CDs.

Can anybody give me a hint, please? (x86-PC, Kernel 2.2.13)

Regards,
Gerry

--
Gerhard Fuellgrabe Phone: +49.5323.96788 Fax: 962044
Arnikaweg 34 Mobile: +49.170.3508588
D-38678 Clausthal-Zellerfeld E-mail: gerd@harz.de

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:0.032 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site