lkml.org 
[lkml]   [2000]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PROBLEM : detection of too many devices under IDE-SCSI emulation
On Tue, Mar 21, 2000 at 05:04:12PM +0100, Marc Bianciotto wrote:
> [1.]
> detection of too many devices under IDEE-SCSI emulation
> [2.]
> I have installed an ATAPI CDR  (TEAC CD-W54EK ), so I recompiled my
> kernel with necessary options (including IDE-SCSI emulation). The CDR
> works BUT during the boot, 8 CD and 8 CDR are recognized (I sware I have
> only one of both : ). It is possible to mount /dev/scd0 to /dev/scd7,
> and I added an scd8 device to make my CD work. I tried this with
> swapping the CD and the CDR in master and slave mode, with 2.2.14 and
> 2.3.99 kernels.
> dmesg :

You could probably work around this by turning off "Probe all LUN's" in the
kernel configuration (not sure if there is a command line param you can send
at bootup, so a recompile may be needed).

Ben

--
-----------=======-=-======-=========-----------=====------------=-=------
/ Ben Collins -- ...on that fantastic voyage... -- Debian GNU/Linux \
` bcollins@debian.org -- bcollins@openldap.org -- bmc@visi.net '
`---=========------=======-------------=-=-----=-===-======-------=--=---'

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:0.048 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site