Messages in this thread | | | Date | Sun, 12 Mar 2000 04:01:19 -0800 (PST) | From | Chris Mason <> | Subject | Re: (reiserfs) Re: patch: reiserfs for 2.3.49 |
| |
I've just reproduced this without md running on my machine. Rask, many thanks for finding the bug, I'll see what I can find.
-chris
On 12 Mar 2000, Rask Ingemann Lambertsen wrote:
> Den 11-Mar-00 17:59:40 skrev Chris Mason følgende om "patch: reiserfs for 2.3.49": > > Hello everyone, > > > ReiserFS for 2.3.49 is now available for testing, comments, and review. > > At compile time, make install in linux/fs/reiserfs/utils fails because > reiserfsck is not being compiled. > > At runtime, I have run into an unexpected problem compiling a kernel on > reiserfs (i.e. the kernel tree is on a reiserfs partition). When I exit > from make config, the screen shows > > Saving your kernel configuration... > > and that's it, the shell prompt never returns. On the console: > > ReiserFS version 3.6.1 > 12285 > 0: reiserfs_get_block > PAP-12285: balance_leaf: insert_size must be 0 (4) > > and the system is locked so solid that <Alt-SysReq-s> and <Alt-SysReq-u> > don't work. After a restart, I could reproduce the problem, again when > exiting from make menuconfig. Reiserfs was compiled into the kernel. The > disk where I can reproduce this problem: > > md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 > linear personality registered > raid0 personality registered > md.c: sizeof(mdp_super_t) = 4096 > Configuring aha174x at IO:4c80, IRQ 12 > aha174x: Extended translation enabled. > scsi0 : Adaptec 174x (EISA) > scsi : 1 host. > Vendor: CDC Model: 94181-15 Rev: 0293 > Type: Direct-Access ANSI SCSI revision: 01 CCS > Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 > Vendor: CDC Model: 94181-15 Rev: 0293 > Type: Direct-Access ANSI SCSI revision: 01 CCS > Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 > scsi : detected 2 SCSI disks total. > SCSI device sda: hdwr sector= 512 bytes. Sectors= 1173930 [573 MB] [0.6 GB] > sda: sda1 sda2 sda3 > SCSI device sdb: hdwr sector= 512 bytes. Sectors= 1173930 [573 MB] [0.6 GB] > sdb: sdb1 sdb2 > [cut] > (read) sda2's sb offset: 551872 [events: 00000004] > (read) sdb2's sb offset: 551872 [events: 00000004] > autorun ... > considering sdb2 ... > adding sdb2 ... > adding sda2 ... > created md0 > bind<sda2,1> > bind<sdb2,2> > running: <sdb2><sda2> > now! > sdb2's event counter: 00000004 > sda2's event counter: 00000004 > md0: max total readahead window set to 128k > md0: 1 data-disks, max readahead per data-disk: 128k > md: updating md0 RAID superblock on device > sdb2 [events: 00000005](write) sdb2's sb offset: 551872 > sda2 [events: 00000005](write) sda2's sb offset: 551872 > . > ... autorun DONE. > > In both cases, the file system was mounted manually with "mount -t > reiserfs /dev/md0 /mnt/temp2", i.e. no options. My /etc/raidtab: > > raiddev /dev/md0 > raid-level linear > nr-raid-disks 2 > persistent-superblock 1 > chunk-size 16 > device /dev/sda2 > raid-disk 0 > device /dev/sdb2 > raid-disk 1 > > My /proc/cpuinfo: > > processor : 0 > vendor_id : unknown > cpu family : 4 > model : 0 > model name : unknown > stepping : unknown > fdiv_bug : no > hlt_bug : no > sep_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : -1 > wp : yes > flags : > bogomips : 32.87 > > My /proc/version: > > Linux version 2.3.49 (root@vissevasse.kampsax.dtu.dk) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #10 Sat Mar 11 20:19:56 CET 2000 > > Regards, > > /¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯T¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯\ > | Rask Ingemann Lambertsen | E-mail: mailto:rask@kampsax.dtu.dk | > | Please do NOT Cc: to me or the | WWW: http://www.gbar.dtu.dk/~c948374/ | > | mailing list. I am on the list.| "ThrustMe" on XPilot, ARCnet and IRC | > | Linux is like a wigwam - no windows, no gates, apache inside! | >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |