Messages in this thread | | | From | wrighrc@eng ... | Date | Sat, 05 Feb 2000 23:32:10 -0600 | Subject | Kernel Panic 2.2.12 & 2.2.14 ide driver maybe |
| |
I tried 2.2.14 too and got the same message. I suspect the hardrive driver, but hey I'm not a kernel hacker.
--Please advise me what I need to do to get rid of this. Thanks
Unable to handle kernel paging request at virual address d40c4000 current->tss.cr3 = 00101000, %cr3 = 00101000 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<c011678>] EFLAGS: 00010006 eax: 00000001 ebx: 00000001 ecx: 00000000 edx: d40c4000 esi: 00000001 edi: 00000001 ebp: c0225e5c esp: c0225e64 ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 0, process nr: 0, sackpage=c0225000) Stack: 00000001 c024d760 c0224000 00000001 00000000 c0224000 c0225e90 c011859d 00000000 c0224000 c010ae6b c0225f8c c010ab38 00000000 00000005 c0376000 c0224000 c0224000 c0225f8c 00000000 00000018 00000018 ffffff00 c0113984 Call Trace: [<c011859d>] [<c010ae6b>] [<c010ab38>] [<c0113984>] [<c011749e>] [<c01d2940>] [<c010a1cf>] [<c010a1d4>] [<c01d08b8>] [<c01d1ece>] [<c010f20c>] [<c01d1ece>] [<c0109e0d>] [<c0111120>] [<c0108595>] [<c01085df>] [<c0106000>] [<c0108620>] [<c0109d08>] [<c0106000>] [<c010607b>] [<c0106000>] [<c0100176>] Code: 8b 02 85 c0 74 0e 8b 02 83 f8 02 74 07 8b 02 83 f8 10 75 06 Aiee, killing interrupt handler Kernel panic: Attempted to kill the idle task! In swapper task - not syncing
Linux version 2.2.12-20 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Sep 27 10:25:54 EDT 1999 Detected 400917224 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 799.54 BogoMIPS Memory: 63732k/66496k available (1008k kernel code, 412k reserved, 1000k data, 64k init) DENTRY hash table entries: 262144 (order: 9, 2097152 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.4.0 initialized CPU: AMD AMD-K6(tm) 3D processor stepping 0c Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfb3b0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: 00:38 [1106/0596]: Work around ISA DMA hangs (00) Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 65536 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio hda: FUJITSU MPE3084AE, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: FUJITSU MPE3084AE, 8063MB w/512kB Cache, CHS=1027/255/63 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 872.871 MB/sec p5_mmx : 761.238 MB/sec 8regs : 586.740 MB/sec 32regs : 408.051 MB/sec using fastest function: pII_mmx (872.871 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 > RAMDISK: Compressed image found at block 0 autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem). autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 64k freed Adding Swap: 136512k swap-space (priority -1) ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xe800, IRQ 11. eth0: RealTek RTL-8029 found at 0xe800, IRQ 11, 00:80:AD:3A:59:A7.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |