Messages in this thread | | | Date | Tue, 29 Feb 2000 15:29:06 -0500 (EST) | From | David Forrest <> | Subject | re: [PATCH] linux-2.2.14/Documentation/sound/ALS007 |
| |
On Tue, 29 Feb 2000, Jonathan Woithe wrote:
> Hi all > > > Attached please find a small documentation patch that helps generalize > > this file. > > Basically I think these changes are fine. My only comment (which is > admittedly nit-picking) is that the "==="s under the title maybe should be > extended to match the new title's length. :)
That nit is picked, and a new patch is attached.
... > first attempt at ALS007 detection code broke his ALS-100. As a result of a > number of (register-level) tests Mikael ran for me, I came up with the > current code which is able to distinguish between the ALS007 and ALS100. > The mention of the ALS100 at line 773 is only due to this.
Would you like any tests run on my ALS200? > > > Further, I suggest: > > mv Documentation/sound/ALS007 Documentation/sound/ALSxxx > > Sounds consistant to me. > > Regards > jonathan >
Dave -- Dave Forrest dforrest@virginia.edu (804)296-7283h 924-3954w http://www.people.virginia.edu/~drf5n/ 1,2c1,2 < ALS-007 based sound cards < ========================= --- > ALS-007/ALS-100/ALS-200 based sound cards > ========================================= 4,9c4,10 < Support for sound cards based around the Avance Logic ALS-007 chip is < included. The ALS-007 is a single chip PnP sound solution which is mostly < hardware compatible with the Sound Blaster 16 card, with most differences < occurring in the use of the mixer registers. For this reason the ALS-007 < code is integrated as part of the Sound Blaster 16 driver (adding only 800 < bytes to the SB16 driver). --- > Support for sound cards based around the Avance Logic > ALS-007/ALS-100/ALS-200 chip is included. These chips are a single > chip PnP sound solution which is mostly hardware compatible with the > Sound Blaster 16 card, with most differences occurring in the use of > the mixer registers. For this reason the ALS code is integrated > as part of the Sound Blaster 16 driver (adding only 800 bytes to the > SB16 driver). 11c12 < To use an ALS-007 sound card under Linux, enable the following options in the --- > To use an ALS sound card under Linux, enable the following options in the 15c16 < Since the ALS-007 is a PnP card, the sound driver probably should be --- > Since the ALS-007/100/200 is a PnP card, the sound driver probably should be 40a42,43 > > Modified 2000-02-29 by Dave Forrest, drf5n@virginia.edu to add ALS100/ALS200
| |