lkml.org 
[lkml]   [2000]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectPROBLEM: kernel oops on boot in 2.4.0 test10
    [1.] One line summary of the problem: 
    kernel oops on boot in 2.4.0 test 10 (i386)

    [2.] Full description of the problem/report:
    On every boot of test 10, I get a kernel oops very early on.
    Is reproducible (happens every boot).
    I've successfully booted 2.3 kernels on this machine, but get this
    kernel oops on boot every time with the later 2.4.0tests (from about
    test5 on -- that's from memory, may not be accurate).
    I am successfully running a late 2.2 kernel: Linux version 2.2.15-4mdk
    (chmou@kenobi.mandrakesoft.com) (gcc version 2.95.3 19991030 (prerelease)) #1
    Wed May 10 15:31:30 CEST 2000

    [3.] Keywords (i.e., modules, networking, kernel):
    kernel oops on boot

    [4.] Kernel version (from /proc/version):
    2.4.0-test10 (final) (not from /proc/version)

    [5.] Output of Oops.. message (if applicable) with symbolic information =
    resolved (see Documentation/oops-tracing.txt)
    ksymoops 2.3.4 on i586 2.2.15-4mdk. Options used
    -v /usr/src/linux/vmlinux (specified)
    -K (specified)
    -L (specified)
    -O (specified)
    -m /usr/src/linux/System.map (specified)

    Unable to handle kernel paging request at virtual address ffffff7f
    c0144c30
    *pde =3D 00001063
    Oops: 0002
    CPU: 0
    EFLAGS: 00010246
    eax: 00000000 ebx: ffffff7f ecx: 00000013 edx: f7fbf020 =

    esi: 00000000 edi: ffffff7f ebp: 00000002 esp: c1ef7f68 =

    ds: 0018 es: 0018 ss: 0018
    Process swapper (pid: 1, stackpage=3Dc1ef7000)
    Stack: c1ef7fb0 00000000 c1efdda0 c1ef8400 00000001 00000010 0000004f
    c1ef7fb0
    c0194d36 c1ef7fb0 c1efdea0 c1ef7fb0 c01f9ef2 00000001 c1ef8400
    c021fd20
    c0105000 00000001 00003130 c01f9f17 c02336de c01f9f17 c0233706
    c1ef8400
    Call Trace: [<c0194d36>] [c01f9cf2>] [<c0105000>] [<c01f9f17>] [<c01f9f17=
    >]
    [<c0105000>] [<c0107007>] [<c0107437>]
    Code: f3 ab 8d 55 01 8d 43 4c 89 54 24 10 8b 74 24 1c c1 6c 24 10
    Using defaults from ksymoops -t elf32-i386 -a i386

    Trace; c0194d36 <isapnp_proc_attach_device+36/94>
    Trace; c0105000 <empty_bad_page+0/1000>
    Trace; c0107007 <init+7/150>
    Trace; c0107437 <kernel_thread+23/30>
    Code; 00000000 Before first symbol
    00000000 <_EIP>:
    Code; 00000000 Before first symbol
    0: f3 ab repz stos %eax,%es:(%edi)
    Code; 00000002 Before first symbol
    2: 8d 55 01 lea 0x1(%ebp),%edx
    Code; 00000005 Before first symbol
    5: 8d 43 4c lea 0x4c(%ebx),%eax
    Code; 00000008 Before first symbol
    8: 89 54 24 10 mov %edx,0x10(%esp,1)
    Code; 0000000c Before first symbol
    c: 8b 74 24 1c mov 0x1c(%esp,1),%esi
    Code; 00000010 Before first symbol
    10: c1 6c 24 10 00 shrl $0x0,0x10(%esp,1)

    Kernel panic: Attempted to kill the idle task!

    [6.] A small shell script or example program which triggers the
    problem (if possible)
    Not applicable

    [7.] Environment
    Not applicable

    [7.1.] Software (add the output of the ver_linux script here)
    [But note: I compiled the kernel and modules with egcs 2.1.1]
    -- Versions installed: (if some fields are empty or looks
    -- unusual then possibly you have very old versions)
    Linux nimrod 2.2.15-4mdk #1 Wed May 10 15:31:30 CEST 2000 i586 unknown
    Kernel modules found
    Gnu C 2.95.3
    Binutils 2.9.5.0.31
    Linux C Library ..
    ldd: missing file arguments
    Try `ldd --help' for more information.
    ls: /usr/lib/libg++.so: No such file or directory
    Procps 2.0.6
    Mount 2.10h
    Net-tools (1999-04-20)
    Kbd [option...]
    Sh-utils 2.0
    Sh-utils Parker.
    Sh-utils =

    Sh-utils Inc.
    Sh-utils NO
    Sh-utils PURPOSE.

    [7.2.] Processor information (from /proc/cpuinfo):
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 5
    model : 6
    model name : AMD-K6tm w/ multimedia extensions
    stepping : 2
    cpu MHz : 198.955487
    cache size : 64 KB
    fdiv_bug : no
    hlt_bug : no
    sep_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 1
    wp : yes
    flags : fpu vme de pse tsc msr mce cx8 sep mmx
    bogomips : 397.31


    [7.3.] Module information (from /proc/modules):
    Not applicable

    [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem=
    )
    cat /proc/ioports
    0000-001f : dma1
    0020-003f : pic1
    0040-005f : timer
    0060-006f : keyboard
    0070-007f : rtc
    0080-008f : dma page reg
    00a0-00bf : pic2
    00c0-00df : dma2
    00f0-00ff : fpu
    0170-0177 : ide1
    01f0-01f7 : ide0
    02f8-02ff : serial(auto)
    0376-0376 : ide1
    03c0-03df : vga+
    03f6-03f6 : ide0
    03f8-03ff : serial(auto)
    7000-707f : eth0
    7800-7807 : ide0
    7808-780f : ide1

    [no /proc/iomem]


    [7.5.] PCI information ('lspci -vvv' as root)


    00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1521 [Aladdin III] (rev 1d)
    Subsystem: Acer Laboratories Inc. [ALi] ALI M1521 Aladdin III CPU Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
    <MAbort+ >SERR- <PERR-
    Latency: 32 set

    00:02.0 ISA bridge: Acer Laboratories Inc. [ALi] M1523 (rev b3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+
    <MAbort+ >SERR- <PERR-
    Latency: 0 set

    00:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT
    [Mach64 GT] (rev 9a) (prog-if 00 [VGA])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
    <MAbort- >SERR- <PERR-
    Interrupt: pin A routed to IRQ 0
    Region 1: I/O ports at <unassigned> [disabled]

    00:0b.0 IDE interface: Acer Laboratories Inc. [ALi] M5219 (rev 20) (prog-if
    fa)
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
    <MAbort- >SERR- <PERR-
    Latency: 2 min, 4 max, 32 set
    Interrupt: pin A routed to IRQ 0
    Region 4: I/O ports at 7800

    00:0c.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 02)
    (prog-if 10 [OHCI])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
    <MAbort- >SERR- <PERR-
    Latency: 32 set
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at 08100000 (32-bit, non-prefetchable)

    00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
    Subsystem: Hauppauge computer works Inc.: Unknown device 13eb
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
    <MAbort- >SERR- <PERR-
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 03101000 (32-bit, prefetchable)

    00:0d.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
    Subsystem: Hauppauge computer works Inc.: Unknown device 13eb
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
    <MAbort- >SERR- <PERR-
    Latency: 4 min, 255 max, 32 set
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 03102000 (32-bit, prefetchable)

    00:0e.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)
    (prog-if 00 [VGA])
    Subsystem: 3Dfx Interactive, Inc. Voodoo3
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
    <MAbort- >SERR- <PERR+
    Interrupt: pin A routed to IRQ 9
    Region 0: Memory at 04000000 (32-bit, non-prefetchable)
    Region 1: Memory at 06000000 (32-bit, prefetchable)
    Region 2: I/O ports at 7400
    Expansion ROM at 03120000 [disabled]
    Capabilities: [60] Power Management version 1
    Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:0f.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43
    (rev 41)
    Subsystem: Kingston Technologies: Unknown device 0001
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
    SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
    <MAbort- >SERR- <PERR-
    Latency: 20 min, 40 max, 32 set, cache line size 08
    Interrupt: pin A routed to IRQ 10
    Region 0: I/O ports at 7000
    Region 1: Memory at 03100000 (32-bit, non-prefetchable)
    Expansion ROM at 03140000 [disabled]


    [7.6.] SCSI information (from /proc/scsi/scsi)
    Not applicable

    [7.7.] Other information that might be relevant to the problem
    (please look in /proc and include all information that you
    think to be relevant):
    Not applicable


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 12:45    [W:0.032 / U:0.708 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site