Messages in this thread | | | Date | Thu, 6 Jan 2000 07:40:14 +0100 | From | Dominik Kubla <> | Subject | Re: 2.3.36 doesn't boot on my Alpha |
| |
On Thu, Jan 06, 2000 at 03:00:15AM +0100, Christian Groessler wrote:
> scsi-ncr53c7,8xx : at PCI bus 0, device 6, function 0 > scsi-ncr53c7,8xx : disabling I/O mapping since base address 0 (0x8000) > bits 0..1 indicate a non-IO mapping > scsi-ncr53c7,8xx : NCR53c810 at memory 0x2200000, io 0x0, irq 11 > scsi0 : not initializing, no I/O or memory mapping known > scsi : 0 hosts.
This one is simple: you are using the wrong driver here, use the 53c8xx driver (it's the next in the selection list) the 53c7,8xx driver is just there for 53c7xx EISA controller also it might work on some 53c8xx PCI controllers as well.
Choose 53c8xx driver and everything should work, at least it does on my Multia...
Yours, Dominik Kubla
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |