![]() | |||||||||||
Messages in this thread |
On Sat, Jan 29, 2000 at 11:40:45PM -0800, Andre Hedrick wrote: > > Drat!!!!!!!!!! The other WDC rule........ > > Fastest drive must be master..........do not ask why. > Both of these will report ATA-66. > I am also seeing similar problems with 2.3.41, but not 2.3.40. But here, it is the hdb interrupt that is missed. Uniform Multi-Platform E-IDE driver Revision: 6.30 PIIX3: IDE controller on PCI bus 00 dev 39 PIIX3: not 100% native mode: will probe irqs later hda: QUANTUM FIREBALL1080A, ATA DISK drive hdb: Maxtor 92720U8, ATA DISK drive ide2: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: QUANTUM FIREBALL1080A, 1039MB w/83kB Cache, CHS=528/64/63 hdb: Maxtor 92720U8, 25965MB w/2048kB Cache, CHS=3310/255/63 > > If you reverse the drives, I expect the missed interrupt goes away. > If it does not let me know. > > Also you have not enable PIIX tuning. > This will force the drives to their correct limits with respect to the > host adapter. I will also try both of these. By the way, I initially considered that my problem might be an interrupt controller problem, since in one crash event, my ethernet card, a 3com vortex, got stuck in a flood of interrupts. dave... - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||
| Last update: 2005-03-22 13:56 [from the cache] ©2003-2008 | |||||||||||