![]() | |||||||||||||
Messages in this thread |
You have to use my ATA-66 patch code on linux.kernel.org for 2.2.X. 2.3.41 has this added. http://linux.kernel.org/pub/linux/kernel/people/hedrick/ Note that ./old/ has the 2.2.14 code. On Sun, 30 Jan 2000, Kedar Patankar wrote: > Hi, > > I don't know if this is the right place to ask this, sorry if > that's not the case. I would appreciate if anyone can point me to the > proper forum. > OK, the thing is I have an Intel i810 chipset based motherboard, > with Pentium-II @400MHz running RH 6.1 stock. > The mobo manual claims that it has ATA-66 IDE controller on-board. > Linux works fine with it (kernel 2.2.12 and 2.2.14). But when I do hdparm > -t /dev/hda, I get barely 4 MB/sec when use_dma, 32 bit IO and multicount > are off. When I do hdparm -c1 -d1 -m16 /dev/hda, I do see a noticable > speed increase, but after that if I do hdparm -t /dev/hda, I keep getting > more or less chaotic results, with the throughput varying anywhere between > 5 MB/sec to 18 MB/sec. > Any ideas as to why should this happen? Am I doing anything wrong? > Thanx a lot for your time. I hope someone will help me figure out what's > going on in my machine... > > Regards, > Kedar. > > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.rutgers.edu > Please read the FAQ at http://www.tux.org/lkml/ > Andre Hedrick The Linux ATA/IDE guy THE USE OF EMAIL FOR THE TRANSMISSION OF UNSOLICITED COMMERCIAL MATERIAL IS PROHIBITED UNDER FEDERAL LAW (47 USC 227). Violations may result in civil penalties and claims of $500.00 PER OCCURRENCE (47 USC 227[c]). Commercial spam WILL be forwarded to postmasters. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2005-03-22 13:56 [from the cache] ©2003-2008 | |||||||||||||