lkml.org 
[lkml]   [2000]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRTL8139 Interrupt line blocked
Hello!

After I started to use RTL8139 in 100 Mbit mode I started to get this
under heavy traffic:
eth3: RTL8139 Interrupt line blocked, status 4.
eth3: RTL8139 Interrupt line blocked, status 4.
eth3: SMP simultaneous entry of an interrupt handler.
eth3: RTL8139 Interrupt line blocked, status 4.

This is
eth3: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xe800, IRQ 16, 00:e0:29:33:f1:97.
There is also rtl8029 card on this same irq.
Box is Dual P3-450 with 2.2.14 kernel
Linux ccssu 2.2.14 #1 SMP Tue Jan 11 18:14:07 EET 2000 i686 unknown
gcc 2.7.2.3 compiled.
Should I worry about such messages?

Bye,
Oleg

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.063 / U:2.928 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site