lkml.org 
[lkml]   [1999]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 3c515 ???
    Hi Horst.

    >>> 1. I recently picked up a 486dx2/50 based workstation base, with
    >>> no expansion slots, and a networking connector on the back
    >>> panel that is clearly wired directly to the motherboard. It's
    >>> not a big system - 8M of RAM and a 430M hard drive - but would
    >>> be more than sufficient for a print server, which is what I
    >>> want it for.

    > I'd just try every 10Mbit Ethernet module (with a variety of IO
    > settings) to see if one finds it. That's what I've done with
    > mistery cards (most turned out NE2000 clones, BTW; some with
    > screwy IO ranges).

    I've since created a network kitchen sink 2.2.10 kernel (one with ALL
    of the network drivers hard compiled in), and the driver that accepts
    and id's the card is...

    Q> AMD LANCE and PCnet (AT1500 and NE2100) support

    ...but, for some reason, the same driver in RedHat 6.0 doesn't work.

    Any clues here?

    Best wishes from Riley.

    +----------------------------------------------------------------------+
    | There is something frustrating about the quality and speed of Linux |
    | development, ie., the quality is too high and the speed is too high, |
    | in other words, I can implement this XXXX feature, but I bet someone |
    | else has already done so and is just about to release their patch. |
    +----------------------------------------------------------------------+
    * ftp://ftp.MemAlpha.cx/pub/rhw/Linux
    * http://www.MemAlpha.cx/Linux/


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:53    [W:2.365 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site