[lkml]   [1999]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: What's this?
On Fri, 30 Jul 1999, Jonathan Miles wrote:

> I was just about to post something similar... I get the problem on 2.0.37
> as well as 2.2.x on a UDMA drive that is being used without UDMA turned
> on. I've pasted relevant information below, let me know if anything else
> will be of use.
> IDE interface: Intel 82371SB PIIX3 IDE (rev 0).
> Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
> I/O at 0xf000 [0xf001].

Can not do UDMA transfers with this host-adapter.
You have to back-speed the xfer rate to DMA mode 2 or get an offboard

> PIIX3: IDE controller on PCI bus 00 dev 39
> PIIX3: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
> hda: SAMSUNG WN312021A (1.2 GB), ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: SAMSUNG WN312021A (1.2 GB), 1151MB w/109kB Cache, CHS=585/64/63, DMA
> This message repeats itself at various times, with no noticeable problems:
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=51373,

Check your SMART status, it may be failing.

> sector=51278
> end_request: I/O error, dev 03:01 (hda), sector 51278
> defiant:~# uname -a
> Linux defiant 2.2.7 #1 Fri Jul 30 15:58:21 BST 1999 i586 unknown

You need kerenl 2.2.10 to apply the patches found in
under the people directory.

Andre Hedrick
The Linux IDE guy

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:53    [W:0.060 / U:7.936 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site