lkml.org 
[lkml]   [1999]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [OT] Re: UPS's
> Speaking up APC ups's, do you use a standard 9 pin straight through rs-232
> cable to connect a SmartUPS APC 1400 andr SmartUPS APC 650 to the computers?
> The cables that came with my 2 upses have long since disappeared, and the last
> time I tried going through the UPS HOWTO I didn't see the appropriate
> information. I really should use the intelligent software on both computers
> (one is linux x86, the other is linux ppc).

No, it's not... The man page for apcd should have that information in it.
There's 3 wires that need to be hooked up to commumicate (obviously,
rx/tx/gnd) If you *REALLY* REALLY need the pin outs, I might beable to get
them for you.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:53    [W:0.154 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site