Messages in this thread | | | From | synflood@endor ... | Date | Sat, 5 Jun 1999 00:28:47 -0400 | Subject | 2.3.5_andrea2 IDE-CD Problem |
| |
Hello!
i was testing 2.3.5_andrea2 patch on 2 server and 1 workstation today, both servers work great, handling load of closer to 30 or 33 w/o problem and almost with no swap on a 64Mb Ram Machine running cistron-radiusd and MySQL (the load was produced by a test script) but the problem came out when i install it at my house workstation/server machine, and i try to mount my IDE Cdrom while burning a CDROM, the syslogd report (well /var/log/messages) the next errors:
Jun 5 00:09:38 endor kernel: hdd: command error: status=0x51 { DriveReady SeekComplete Error } Jun 5 00:09:38 endor kernel: hdd: command error: error=0x54 Jun 5 00:09:38 endor kernel: end_request: I/O error, dev 16:40 (hdd), sector 108 Jun 5 00:09:38 endor kernel: ISOFS: unable to read i-node block Jun 5 00:09:38 endor kernel: ATAPI device hdd: Jun 5 00:09:38 endor kernel: Error: Illegal request -- (Sense key=0x05) Jun 5 00:09:38 endor kernel: Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00) Jun 5 00:09:42 endor kernel: ISOFS: unable to read i-node block Jun 5 00:09:42 endor kernel: isofs_read_super: root inode not initialized Jun 5 00:09:42 endor kernel: ATAPI device hdd: Jun 5 00:09:42 endor kernel: Error: Illegal request -- (Sense key=0x05) Jun 5 00:09:42 endor kernel: Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00) Jun 5 00:10:09 endor kernel: hdd: irq timeout: status=0xd0 { Busy } Jun 5 00:10:10 endor kernel: hdd: ATAPI reset complete Jun 5 00:10:17 endor kernel: hdd: tray open Jun 5 00:10:17 endor kernel: end_request: I/O error, dev 16:40 (hdd), sector 68 Jun 5 00:10:17 endor kernel: isofs_read_super: bread failed, dev=16:40, iso_blknum=17, block=34 Jun 5 00:12:36 endor kernel: set_blocksize: b_count 1! Jun 5 00:12:36 endor kernel: isofs_read_super: root inode not initialized
this problem doesn't shows on a vanilla 2.3.5 kernel , i had ide support compiled in.
this is the output of dmesg: [SNIP] Uniform Multi-Platform E-IDE driver Revision: 6.19 PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: ST33232A, ATA DISK drive hdb: ST36531A, ATA DISK drive hdc: IBM-DTTA-351680, ATA DISK drive hdd: LTN244, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: ST33232A, 3077MB w/128kB Cache, CHS=6253/16/63, UDMA(33) hdb: ST36531A, 6204MB w/128kB Cache, CHS=790/255/63, UDMA(33) hdc: IBM-DTTA-351680, 16124MB w/462kB Cache, CHS=32760/16/63, UDMA(33) hdd: ATAPI 24X CD-ROM drive, 120kB Cache Uniform CDROM driver Revision: 2.55 [SNIP]
Any ideas? any extra info needed?
--
SynFl00d
email : synflood@endor.sick.cl Efax Number : (815) 366-3177 ICQ : 6994327
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |