lkml.org 
[lkml]   [1999]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: DAT problem with 2.2.10
  From: Jiann-Ming Su <js1@microwave.ph.msstate.edu>
Date: Tue, 15 Jun 1999 17:16:53 -0500 (CDT)

What does the following dmesg message mean:

scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0: Firmware Version: 5.07B, I/O Address: 0x8000, IRQ Channel: 25/Level
scsi0: PCI Bus: 0, Device: 5, Address: 0x9000000, Host Adapter SCSI ID: 7
scsi0: Parity Checking: Enabled, Extended Translation: Enabled
scsi0: Synchronous Negotiation: Fast, Wide Negotiation: Enabled
scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
scsi0: SCSI Bus Termination: High Enabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi0 : BusLogic BT-958
scsi : 1 host.
Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: ARCHIVE Model: Python 28388-XXX Rev: 4.28
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
Vendor: TOSHIBA Model: CD-ROM XM-6201TA Rev: 1030
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
scsi0: Target 0: Queue Depth 28, Wide Synchronous at 20.0 MB/sec, offset 15
scsi0: Target 5: Queue Depth 3, Synchronous at 5.00 MB/sec, offset 15
scsi0: Target 6: Queue Depth 3, Synchronous at 10.0 MB/sec, offset 15
scsi : detected 1 SCSI tape 1 SCSI cdrom 1 SCSI disk total.
Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0
Unable to get major 9 for SCSI tapes
st0: Error with sense data: extra data not valid Current error st09:00: sense key Not Ready

[root@athena /root]# uname -a
Linux athena.me.gatech.edu 2.2.10 #27 Tue Jun 15 16:13:42 EDT 1999 alpha unknown


The specific problem I'm having is with BRU. I tell it to append my new
archive, and it hangs, until I eject the tape. Thanks for any help.

You might want to try the 5.06J firmware available from my web site. It's
reported to fix some problems with tape drives compared to 5.07B.

Leonard

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:0.026 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site