Messages in this thread | | | Date | Tue, 1 Jun 1999 14:51:09 +0200 (CEST) | From | Nils Philippsen <> | Subject | Re: [Q] ncr53c400a based Hewlett Packard wannabe SCSI card (take 2) |
| |
On Mon, 31 May 1999, Alan Cox wrote:
> > Has anyone succeeded to use said SCSI card (it was shipped with an HP DeskJet > > and has an NCR 53c400a chip and one jumper(?)/connector with 3 pins and no > > onboard description for it) with Linux-2.2.x? I tried almost anything (except > > the right thing [tm]) to get this thing to work using the g_NCR5380 driver. > > insmod g_NCR5380 ncr_53c400a=1 ncr_irq=-1 ncr_io=0x348 > > Alan >
I tried this (s/ncr_io/ncr_addr), but it didn't work, "Device or resource busy" again.
Out of curiosity, I set ncr_addr=0x280 which produced this:
--8<-- scsi1: SCSI bus busy, waiting up to 5 seconds scsi1: bus busy, attempting to abort --8<--
Then a nearly total freeze (Alt+F? worked but that was all ... oh well, the sane system was just an fsck away.)
Any ideas?
Nils -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Nils Philippsen @college: nils@fht-esslingen.de Vogelsangstrasse 115 @home: nils@wombat.dialup.fht-esslingen.de D 70197 Stuttgart phone: +49-711-6599405 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The use of COBOL cripples the mind; its teaching should, therefore, be regarded as a criminal offence. -- Edsger W. Dijkstra
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |