Messages in this thread | | | Date | Mon, 31 May 1999 11:53:02 +0200 | From | Martin Mares <> | Subject | Re: lspci/oldproc new card |
| |
Hello!
> i got some 16 Port PCI Serial Controllercards - Manual says compatible to > Windows NT and Solaris. > > Board say Aurora Technologies Inc., Aries 16000P > > There is a big PLX Chip on the Board (I think PCI Bridge or something) > saying PCI9060SD REV1A > > 00:0b.0 Communication controller: PLX Technology, Inc.: Unknown device 906d (rev 02) > Subsystem: Unknown device 125c:0640 > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at f3800000 (32-bit, non-prefetchable) > I/O ports at e000 > Memory at f3000000 (32-bit, non-prefetchable) > > Just to be included in the lspci/oldproc interface and/or someone may enlighten me
Already included in pciutils-2.0 :)
> if someone else works on a driver or knows what this chip is ...
PLX9060SD is a generic PCI controller chip, so it won't reveal anything about how does the card really work. I suspect there exists no Linux driver. Can you look at the other chips on the card?
Have a nice fortnight -- Martin `MJ' Mares <mj@ucw.cz> http://atrey.karlin.mff.cuni.cz/~mj/ Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth "Never make any mistaeks."
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |