lkml.org 
[lkml]   [1999]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Compiling 2.0.36 to use both processors
I have ran lilo correctly... I have experience compiling and running
kernels... but am just having problems with the smp config...

kledi

On Wed, 7 Apr 1999, Frank Rietveld wrote:

>
>
> > I am experiencing some problems in compiling a working mp kernel. 2.2.x
> > ran fine, but never could make 2.0.36 detect both processors. My machine
> > is an IBM Netfinity 5000, with 2 PII-350 processors... I edited the
> > makefile and uncommented the SMP lines :
> > SMP = 1
> > #
> > # SMP profiling options
> > SMP_PROF = 1
> >
> > compiled the kernel, ran lilo properly, but nothing happened.. I can see
> > in /proc/cpuinfo just processor 0, and also just one of the LEDs is on
> > (these netfinity series have two leds showing which cpu is being used).
> >
> Are you sure you've got your lilo correctly pointing to the
> kernel that's being made?
> Check the 'image' line in lilo for the path, you can check what
> vmlinuz was made bij make, by just checking the date of the vmlinuz
> files... (vmlinuz files are generally located in / or in /boot/).
>
> Greets,
> Frank
>


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:51    [W:0.041 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site