lkml.org 
[lkml]   [1999]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: cat /proc/tty/driver/serial
Hi Q.

> when I do cat /proc/tty/driver/serial in text mode I get:

> 0: uart:16550A port:3F8 irq:4 tx:0 rx:0
> 1: uart:16550A port:2F8 irq:3 baud:1200 tx:26 rx:6964 fe:2 brk:6 RTS|DTR
> 2: uart:16550A port:3E8 irq:4 baud:38400 tx:287711 rx:4617753
> RTS|CTS|DTR|DSR|CD
> 3: uart:unknown port:2E8 irq:3
> 3: cat: /proc/tty/driver/serial: Bad address

> note that the last line contains what I typed in.

> when I do the same from a x-term, it's normal (last line not
> there.)

> depending on what I use, either that it's normal, or that last
> line is there.

> Is this a bug?

I've just tried it from a telnet session on the system I'm on at the
moment, and here's what I get...

Q> serinfo:1.0 driver:4.27
Q> 0: uart:16550A port:3F8 irq:4 tx:0 rx:0 RTS|DTR
Q> 1: uart:16550A port:2F8 irq:3 tx:0 rx:0 RTS|DTR
Q> 2: uart:unknown port:3E8 irq:4
Q> 3: uart:unknown port:2E8 irq:3

Not sure if this helps or not...

Best wishes from Riley.

+----------------------------------------------------------------------+
| There is something frustrating about the quality and speed of Linux |
| development, ie., the quality is too high and the speed is too high, |
| in other words, I can implement this XXXX feature, but I bet someone |
| else has already done so and is just about to release their patch. |
+----------------------------------------------------------------------+
* ftp://ftp.MemAlpha.cx/pub/rhw/Linux
* http://www.MemAlpha.cx/kernel.versions.html


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:51    [W:0.094 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site