lkml.org 
[lkml]   [1999]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Problems with ATA FLASH MEMORY
    On Wed, 10 Mar 1999, Alan Cox wrote:

    > > emulation. The problem for us turned out to be that the IDE emulation
    > > reported the flash as being removable when it was not.
    >
    > The card it does it to me on is definitely removable, its PCMCIA

    Ours is the flash/IDE used in our Firebox-II (and later) model firewalls.
    I think it is manufactured by Smart Modular Technologies. Here is it's
    ident info:

    Model=, FwRev=Ver.7.0, SerialNo=
    Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
    RawCHS=250/4/16, TrkSize=8448, SectSize=528, ECCbytes=4
    BuffType=1(1Sect), BuffSize=0kB, MaxMultSect=1, MultSect=off
    DblWordIO=no, maxPIO=2(fast), DMA=no
    CurCHS=250/4/16, CurSects=16000, LBA=yes, LBAsects=16000
    IORDY=yes

    Note that it claims it is removeable, and lacks a Model and Serial No. It
    is not removable though; it's soldered to the mainboard. :)

    -bp
    --
    B. James Phillippe . bryan@terran.org
    Software Engineer, WGT Inc. . http://www.terran.org/~bryan


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:50    [W:0.022 / U:0.040 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site