Messages in this thread |  | | | Date | Mon, 22 Feb 1999 11:47:36 -0600 | | From | John Fulmer <> | | Subject | Re: AMD K6-2/400 and FIC VA-503+BM with Linux 2.0.36 |
| |
Alan Cox wrote: > > > I am having similar problems with some K6-2/350 and VA-503+ MB's > > design. > > Are your K6's the ones rated for 100MHz and also the heatsinks > well attached. A friend had the same symptoms because someone > had a price tag sticker between cpu and heatsink. >
I'll try that, but my K6 is cool, almost cold to the touch when it is in operation. I have a very large cpu fan on it (yes it is the right one :)
I will try ripping off the heat transfer pad on the fan and just use heatsink compound, however.
Do we have any good sucess stories with <350 Mhz K6's and FIC VA-503+ MB's? I can't say I've heard one yet with this combo and Linux.
> I'm told but haven't verified this that there are 66MHz bus only > K6/2 parts
Some of the, 300mhz k6's were 66Mhz only rated, which is stamped on the CPU. All of the higher speed CPU's are 100Mhz.
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + John Fulmer | "UNIX was not designed to stop + + Secure Network Group | you from doing stupid things, + + Lawrence, Kansas | because that would also stop you + + | from doing clever things." + + jfulmer@secnetgroup.com | + + http://www.secnetgroup.com | -- ??? + + "The opinions contained above may not reflect those of SNG" + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
|  |