lkml.org 
[lkml]   [1999]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjectno subject (file transmission)
Date
Greetings,

I am seeing a problem happening on my HP Vectra systems running 2.2.1,
as well as -ac1, -ac2, -ac3. All the affected system have an IBM ISA
token ring card with modular support, and are running kde-1.1-pre2.

I see the oops when the system goes into runlevel 5, when starting kdm
(xdm does not trigger the bug) - the system starts dumping kernel
messages on the console until shut down.

The oops is instantly repeatable, every time.

Regards, Joel

----------

here is my .config:

#
# Automatically generated make config: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
CONFIG_M686=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_JAVA=m
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_OTHER is not set
# CONFIG_APM is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
# CONFIG_BLK_DEV_CMD646 is not set
# CONFIG_IDE_CHIPSETS is not set

#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_RAM=m
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_NETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_IP_ALWAYS_DEFRAG=y
CONFIG_IP_TRANSPARENT_PROXY=y
CONFIG_IP_MASQUERADE=y

#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_ICMP=y

#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_MOD=y
CONFIG_IP_MASQUERADE_IPAUTOFW=m
CONFIG_IP_MASQUERADE_IPPORTFW=m
CONFIG_IP_MASQUERADE_MFW=m
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_IP_ALIAS=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y

#
# (it is safe to leave these untouched)
#
CONFIG_INET_RARP=m
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set

#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_ETHERTAP=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
CONFIG_EL2=m
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_RTL8139 is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_ISA=y
# CONFIG_AT1700 is not set
# CONFIG_E2100 is not set
# CONFIG_DEPCA is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_FMV18X is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_HP100 is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
# CONFIG_SEEQ8005 is not set
# CONFIG_SK_G16 is not set
CONFIG_NET_EISA=y
# CONFIG_PCNET32 is not set
CONFIG_ACENIC=m
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DE4X5 is not set
CONFIG_DEC_ELCP=m
# CONFIG_DGRS is not set
CONFIG_EEXPRESS_PRO100=y
# CONFIG_LNE390 is not set
# CONFIG_NE3210 is not set
CONFIG_NE2K_PCI=m
CONFIG_TLAN=m
# CONFIG_VIA_RHINE is not set
# CONFIG_ES3210 is not set
CONFIG_EPIC100=m
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set

#
# Appletalk devices
#
# CONFIG_PLIP is not set
CONFIG_PPP=m

#
# CCP compressors for PPP are only built as modules.
#
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set

#
# Token ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_SKTR=m
# CONFIG_RCPCI is not set
CONFIG_SHAPER=m

#
# Wan interfaces
#
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_DLCI is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA subsystem support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=m
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_PRINTER_READBACK=y
CONFIG_MOUSE=y

#
# Mice
#
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
CONFIG_NVRAM=m
CONFIG_RTC=y

#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set

#
# Joystick support
#
# CONFIG_JOYSTICK is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set

#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_AUTOFS_FS=m
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_MINIX_FS=m
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_SUN=y
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
CONFIG_SMB_WIN95=y
# CONFIG_NCP_FS is not set

#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=m

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
# CONFIG_FB is not set

#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_ADLIB=m
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_CS4232 is not set
CONFIG_SOUND_OPL3SA2=m
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_AD1816 is not set
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_SOFTOSS=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_UART6850=m

#
# Additional low level sound drivers
#
# CONFIG_LOWLEVEL_SOUND is not set

#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y

Here is the ksymoops output:

Options used: -V (default)
-o /lib/modules/2.2.1-ac3/ (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-m /usr/src/linux/System.map (default)
-c 1 (default)

You did not tell me where to find symbol information. I will assume
that the log matches the kernel and modules that are running right now
and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

Warning in compare_ksyms_lsmod, module nfs is in lsmod but not in ksyms, probably no symbols exported
Warning in compare_ksyms_lsmod, module nfsd is in lsmod but not in ksyms, probably no symbols exported
Feb 2 11:46:13 amber kernel: CPU: 0
Feb 2 11:46:13 amber kernel: EIP: 0010:[__generic_copy_to_user+48/60]
Feb 2 11:46:13 amber kernel: EFLAGS: 00010206
Feb 2 11:46:13 amber kernel: eax: 00000000 ebx: 00000000 ecx: 0000005f edx: bffff928
Feb 2 11:46:13 amber kernel: esi: c00cde84 edi: bffff7ac ebp: 00002000 esp: c1cdff74
Feb 2 11:46:13 amber kernel: ds: 0018 es: 0018 ss: 0018
Feb 2 11:46:13 amber kernel: Process kdm (pid: 1167, process nr: 44, stackpage=c1cdf000)
Feb 2 11:46:13 amber kernel: Stack: 000cc000 c018c232 bfffd928 c00cc000 00002000 c1d01a40 ffffffea 00000000
Feb 2 11:46:13 amber kernel: c1d01a40 00000203 c0122cd6 c1d01a40 bfffd928 00002000 c1d01a54 c1cde000
Feb 2 11:46:13 amber kernel: 00000006 bffff94c bffff928 c01087e8 00000006 bfffd928 00002000 00000006
Feb 2 11:46:13 amber kernel: Call Trace: [read_mem+62/100] [sys_read+174/196] [system_call+52/56]
Feb 2 11:46:13 amber kernel: Code: f3 a5 89 c1 f3 a4 5b 5e 89 c8 5f c3 57 b8 00 e0 ff ff 56 21

Code: 00000000 Before first symbol 00000000 <_EIP>:
Code: 00000000 Before first symbol 0: f3 a5 repz movsl %ds:(%esi),%es:(%edi)
Code: 00000002 Before first symbol 2: 89 c1 movl %eax,%ecx
Code: 00000004 Before first symbol 4: f3 a4 repz movsb %ds:(%esi),%es:(%edi)
Code: 00000006 Before first symbol 6: 5b popl %ebx
Code: 00000007 Before first symbol 7: 5e popl %esi
Code: 00000008 Before first symbol 8: 89 c8 movl %ecx,%eax
Code: 0000000a Before first symbol a: 5f popl %edi
Code: 0000000b Before first symbol b: c3 ret
Code: 0000000c Before first symbol c: 57 pushl %edi
Code: 0000000d Before first symbol d: b8 00 e0 ff ff movl $0xffffe000,%eax
Code: 00000012 Before first symbol 12: 56 pushl %esi
Code: 00000013 Before first symbol 13: 21 00 andl %eax,(%eax)


3 warnings issued. Results may not be reliable.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:0.068 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site