Messages in this thread | | | Date | Sat, 13 Feb 1999 23:29:04 -0600 (CST) | From | Dustin Marquess <> | Subject | Re: modem doesn't work under 2.2.x |
| |
On Sat, 13 Feb 1999, Conde Martinez Rodolfo wrote:
> > I don't know if my last mail reached at all but here's it again a > little modified afther i tried the kernel's pnp driver (it didn't work :( ) > sorry if it arrives twice........ > > > > Hi all it's been some time since i last wrote to the list but now > i'm here again with a little problem with my modem and 2.2.x: > > Since 2.1.x my modem doesn't work with, if i try to initialize it > the program that i use tells me: unable to open /dev/modem (symbolic link > to /dev/ttyS2) and if i try using setserial /dev/modem it tells me: Device > or resource busy....my modem is a Rockwell fax modem PnP, for the PnP > think i use the bios to configure it but i dont't think it could be that > the problem because the bios configures also a SB AWE64 and there is till > now no problem, the driver loads ok... > > What can i do ?? it seems i'm the only one with this problem at > least here in mexico as nobody has said something about it... > > i have used the kernel's pnp driver but it doesn't work non with > the modem neither with the SB.... > > thanks for all the answers......
Try making the serial port driver a module, and run isapnp to config the modem before the load the module...
-Dustin
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |