Messages in this thread | | | Date | Wed, 15 Dec 1999 22:02:31 +0000 | From | Thorsten Kranzkowski <> | Subject | Re: [fix] Re: 2.3.31 (and 2.3.32pre2) breaks cpp with segmentation fault (ok in 2.3.30), reproducable (mremap problem???) |
| |
On Tue, Dec 14, 1999 at 12:35:34PM -0500, Benjamin C.R. LaHaise wrote: > On Tue, 14 Dec 1999, Thorsten Kranzkowski wrote: > > > And for me it's not limited to gcc. 'top', 'iptraf', even 'ls' also segfaulted > > without any sane reason. :) > > Here's the fix that works for a couple of other people who have triggered > the problem. I was being too clever, and it seems that in some cases even > though the new parameter is not touched, its presence is corrupting > *something*. If someone has an explanation, I'd be interested in hearing > it. > > -ben
Hmm - it seems I have a different problem - your patch makes no difference (applied to 2.3.31)
After loading NAT-modules and activating isdn-dialup I got this:
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -mcpu=ev56 -pipe -mno-fp-regs -ffixed-8 -Wa,-m21164a -D__KERNEL__ -D__linux__ -I/home/tmp/linux-2.2.14-generic/include -DPALCODE_AT=0xfffffc0000200000 -DLOADER_AT=0xfffffc0000d00000 -DSTUB_AT=0xfffffc0000210000 -DDECOMP_PALBASE=0x300000 -DDECOMP_PARAMS=0x300B00 -DDECOMP_BASE=0x300F00 -DPALCODE_SIZE=0x10000 -DLOADER_SIZE=0x20000 -DDC21066 -DMINI_NVRAM -I. -Ifs -Ivideo -Ipalcode/noname -I/home/tmp/linux-2.2.14-generic/include -c -o zip/inflate.o zip/inflate.c gcc: Internal compiler error: program cc1 got fatal signal 11 make: *** [zip/inflate.o] Error 1 [Marvin:/home/tmp/milo-2.2#] Dec 15 20:58:20 Marvin sendmail[667]: NOQUEUE: SYSERR(root): SMTP-MAIL: died on signal 11
I issued another 'make' which got a little further. After a minute or two:
gcc: Internal compiler error: program cc1 got fatal signal 11 make: *** [milo.o] Error 1 [Marvin:/home/tmp/milo-2.2#] {standard input}: Assembler messages: {standard input}:0: Warning: end of file not at end of a line; newline inserted cpp: output pipe has been closed {standard input}:1133: Error: unknown opcode `ld'
There are no problems when I don't load the NAT-modules. Hmm.
Thorsten.
-- | Thorsten Kranzkowski Internet: dl8bcu@gmx.net | | Mobile: ++49 161 7210230 Snail: Niemannsweg 30, 49201 Dissen, Germany | | Ampr: dl8bcu@db0nei.#nrw.deu.eu, dl8bcu@marvin.dl8bcu.ampr.org [44.130.8.19] |
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |