lkml.org 
[lkml]   [1999]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: IDE drive status errors
    On Mon, 29 Nov 1999, Deon Stoltz wrote:

    > New IDE (ATA) drives (Seagate ST34311A) gives the following errors:
    >
    > "hda: status timeout: status=0xd0 { Busy }
    > hda: no DRQ after issuing WRITE
    > ide0: reset: success"
    >
    > Errors appear after disk activity but is not consistant.
    > Distribution is RedHat 6.1 / kernel 2.2.12 (no patches)
    > Tried on 2 different systems (Pentium II's) - same result.
    > System boots ok so can't be geometry problems.
    >
    > Anyone else seen this problem?

    I just saw it on 2.3.29 on a Maxtor 82400D4. after doing some heavy
    swapping i got:

    Nov 27 02:30:48 shanes kernel: hda: lost interrupt
    Nov 27 02:30:48 shanes kernel: hda: write_intr error1: nr_sectors=5, stat=0x51
    Nov 27 02:30:48 shanes kernel: hda: write_intr: status=0x51 { DriveReady SeekComplete Error }
    Nov 27 02:30:48 shanes kernel: hda: write_intr: error=0x40 { UncorrectableError }, LBAsect=3193171, sector=64339
    Nov 27 02:30:48 shanes kernel: end_request: I/O error, dev 03:03 (hda), sector 64339
    Nov 27 02:30:48 shanes kernel: hda: status timeout: status=0xd0 { Busy }
    Nov 27 02:30:48 shanes kernel: hda: no DRQ after issuing WRITE
    Nov 27 02:30:48 shanes kernel: ide0: reset: success
    Nov 27 02:30:48 shanes kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
    Nov 27 02:30:48 shanes kernel: hda: drive not ready for command
    Nov 27 02:30:48 shanes kernel: ide0: reset: success

    [root@shanes /root]# /sbin/hdparm -i /dev/hda

    /dev/hda:

    Model=Maxtor 82400D4, FwRev=ZAVXC027, SerialNo=H406QJYA
    Config={ Fixed }
    RawCHS=4708/16/63, TrkSize=0, SectSize=0, ECCbytes=20
    BuffType=3(DualPortCache), BuffSize=256kB, MaxMultSect=16, MultSect=off
    DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast)
    CurCHS=4708/16/63, CurSects=1774190664, LBA=yes, LBAsects=4745664
    tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2
    IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4

    The ide disk is 2 years old.

    --
    Jorgen


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:55    [W:0.020 / U:0.312 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site