lkml.org 
[lkml]   [1999]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ATAPI CDRom Error
Michael K Vance wrote:
>
> Got this on a random `cdcd eject`:
>
> hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: packet command error: error=0x40
> ATAPI device hdc:
> Error: Hardware error -- (Sense key=0x04)
> (vendor-specific error) -- (asc=0xb6, ascq=0x00)
> The failed "Start Stop Unit" packet command was:
> "1b 00 00 00 02 00 00 00 00 00 00 00 "
>
> Basically, it tried to eject, and got stuck after about a cm. Afterwards, it
> was non-repeatable. The message seems to say hardware error, but I've never
> had this happen before, and there wasn't anything blocking the tray <shrug>. I
> also noticed these sort of activities generate messages like:

Yes, it means "Media load mechanism failed" so that seems to indicate a
hardware error.

--
* Jens Axboe <axboe@image.dk>
* Linux CD-ROM Maintainer
* "The only thing that interferes with my
* learning is my education." -- A. Einstein



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:0.048 / U:2.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site