Messages in this thread | | | From | mike mangino <> | Subject | ide tape oops with sony SuperStation | Date | Sun, 31 Jan 1999 11:40:46 -0500 (EST) |
| |
When I try to dump to my Sony SuperStation IDE tape drive, I get an immediate string of oopses. They scroll by so fast I can't write them down. The last one mentions that the interrupt handler has been killed. I'm running kernel 2.2.0
I recompiled the ide-tape driver with IDETAPE_DEBUG_LOG defined and am attaching the output. I'm willing to help debug any way I can, just let me know what I can do.
//----------------------------------------------------------------------- Linux version 2.2.0 (root@fusion.fission.org) (gcc version 2.7.2.3) #12 Sat Jan 30 17:21:58 EST 1999 Detected 350802244 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 349.80 BogoMIPS Memory: 128296k/131072k available (840k kernel code, 408k reserved, 1492k data, 36k init) CPU: Intel Pentium II (Deschutes) stepping 01 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xf0750 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALL_TM1700A, ATA DISK drive hdb: FUJITSU MPC3064AT, ATA DISK drive hdc: CD-ROM CDU701, ATAPI CDROM drive hdd: SuperStation-Int, ATAPI TAPE drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: QUANTUM FIREBALL_TM1700A, 1628MB w/76kB Cache, CHS=827/64/63, DMA hdb: FUJITSU MPC3064AT, 6187MB w/0kB Cache, CHS=788/255/63, UDMA hdc: ATAPI 14X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.52 Dumping ATAPI Identify Device tape parameters Protocol Type: <6>ATAPI Device Type: 1 - <6>Streaming Tape Device Removable: Yes Command Packet DRQ Type: <6>Accelerated DRQ Command Packet Size: <6>12 bytes Model: SuperStation-Int Firmware Revision: 1.06 Serial Number: Write buffer size: 0 bytes DMA: No LBA: Yes IORDY can be disabled: No IORDY supported: Yes ATAPI overlap supported: No PIO Cycle Timing Category: 2 DMA Cycle Timing Category: 0 Single Word DMA supported modes: <6> Multi Word DMA supported modes: <6> Enhanced PIO Modes: Mode 3 Minimum Multi-word DMA cycle per word: <6>Not supported Manufacturer's Recommended Multi-word cycle: <6>Not supported Minimum PIO cycle without IORDY: <6>240 ns Minimum PIO cycle with IORDY: <6>180 ns rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=0 ide-tape: rq_stack_index=0 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 6, asc = 29, ascq = 0 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 1 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=1 ide-tape: rq_stack_index=1 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 2 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=2 ide-tape: rq_stack_index=2 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 3 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=3 ide-tape: rq_stack_index=3 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 ide-tape: ht0: I/O error, pc = 1a, key = 2, asc = 4, ascq = 1 ide-tape: Reached idetape_pc_callback Reached idetape_end_request ide-tape: Can't get tape parameters - assuming some default values bloxk_size=0,speed=0, buffer_size=0 ide-tape: hdd <-> ht0, 450KBps, 6*26kB buffer, 2600kB pipeline, 140ms tDSC Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com 3c900 Boomerang 10Mbps Combo at 0xd000, 00:60:08:06:b2:8d, IRQ 10 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10base2 interface. Enabling bus-master transmits and whole-frame receives. Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 hdb4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 36k freed Adding Swap: 130748k swap-space (priority -1) parport0: PC-style at 0x378, irq 7 [SPP,ECP,ECPEPP,ECPPS2] lp0: using parport0 (interrupt-driven). tty_io.c: process 289 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0 YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.16 detected OK (220) Linux version 2.2.0 (root@fusion.fission.org) (gcc version 2.7.2.3) #12 Sat Jan 30 17:21:58 EST 1999 Detected 350802244 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 349.80 BogoMIPS Memory: 128296k/131072k available (840k kernel code, 408k reserved, 1492k data, 36k init) CPU: Intel Pentium II (Deschutes) stepping 01 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xf0750 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALL_TM1700A, ATA DISK drive hdb: FUJITSU MPC3064AT, ATA DISK drive hdc: CD-ROM CDU701, ATAPI CDROM drive hdd: SuperStation-Int, ATAPI TAPE drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: QUANTUM FIREBALL_TM1700A, 1628MB w/76kB Cache, CHS=827/64/63, DMA hdb: FUJITSU MPC3064AT, 6187MB w/0kB Cache, CHS=788/255/63, UDMA hdc: ATAPI 14X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.52 Dumping ATAPI Identify Device tape parameters Protocol Type: <6>ATAPI Device Type: 1 - <6>Streaming Tape Device Removable: Yes Command Packet DRQ Type: <6>Accelerated DRQ Command Packet Size: <6>12 bytes Model: SuperStation-Int Firmware Revision: 1.06 Serial Number: Write buffer size: 0 bytes DMA: No LBA: Yes IORDY can be disabled: No IORDY supported: Yes ATAPI overlap supported: No PIO Cycle Timing Category: 2 DMA Cycle Timing Category: 0 Single Word DMA supported modes: <6> Multi Word DMA supported modes: <6> Enhanced PIO Modes: Mode 3 Minimum Multi-word DMA cycle per word: <6>Not supported Manufacturer's Recommended Multi-word cycle: <6>Not supported Minimum PIO cycle without IORDY: <6>240 ns Minimum PIO cycle with IORDY: <6>180 ns rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=0 ide-tape: rq_stack_index=0 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 6, asc = 29, ascq = 0 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 1 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=1 ide-tape: rq_stack_index=1 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 2 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=2 ide-tape: rq_stack_index=2 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 3 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=3 ide-tape: rq_stack_index=3 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 ide-tape: ht0: I/O error, pc = 1a, key = 2, asc = 4, ascq = 1 ide-tape: Reached idetape_pc_callback Reached idetape_end_request ide-tape: Can't get tape parameters - assuming some default values bloxk_size=0,speed=0, buffer_size=0 ide-tape: hdd <-> ht0, 450KBps, 6*26kB buffer, 2600kB pipeline, 140ms tDSC Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com 3c900 Boomerang 10Mbps Combo at 0xd000, 00:60:08:06:b2:8d, IRQ 10 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10base2 interface. Enabling bus-master transmits and whole-frame receives. Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 hdb4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 36k freed Adding Swap: 130748k swap-space (priority -1) parport0: PC-style at 0x378, irq 7 [SPP,ECP,ECPEPP,ECPPS2] lp0: using parport0 (interrupt-driven). tty_io.c: process 289 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0 YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.16 detected OK (220) Linux version 2.2.0 (root@fusion.fission.org) (gcc version 2.7.2.3) #12 Sat Jan 30 17:21:58 EST 1999 Detected 350802244 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 349.80 BogoMIPS Memory: 128296k/131072k available (840k kernel code, 408k reserved, 1492k data, 36k init) CPU: Intel Pentium II (Deschutes) stepping 01 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xf0750 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALL_TM1700A, ATA DISK drive hdb: FUJITSU MPC3064AT, ATA DISK drive hdc: CD-ROM CDU701, ATAPI CDROM drive hdd: SuperStation-Int, ATAPI TAPE drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: QUANTUM FIREBALL_TM1700A, 1628MB w/76kB Cache, CHS=827/64/63, DMA hdb: FUJITSU MPC3064AT, 6187MB w/0kB Cache, CHS=788/255/63, UDMA hdc: ATAPI 14X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.52 Dumping ATAPI Identify Device tape parameters Protocol Type: <6>ATAPI Device Type: 1 - <6>Streaming Tape Device Removable: Yes Command Packet DRQ Type: <6>Accelerated DRQ Command Packet Size: <6>12 bytes Model: SuperStation-Int Firmware Revision: 1.06 Serial Number: Write buffer size: 0 bytes DMA: No LBA: Yes IORDY can be disabled: No IORDY supported: Yes ATAPI overlap supported: No PIO Cycle Timing Category: 2 DMA Cycle Timing Category: 0 Single Word DMA supported modes: <6> Multi Word DMA supported modes: <6> Enhanced PIO Modes: Mode 3 Minimum Multi-word DMA cycle per word: <6>Not supported Manufacturer's Recommended Multi-word cycle: <6>Not supported Minimum PIO cycle without IORDY: <6>240 ns Minimum PIO cycle with IORDY: <6>180 ns rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=0 ide-tape: rq_stack_index=0 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 6, asc = 29, ascq = 0 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 1 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=1 ide-tape: rq_stack_index=1 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 2 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=2 ide-tape: rq_stack_index=2 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 3 ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 0 bytes transferred ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=3 ide-tape: rq_stack_index=3 rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 Retry number - 0 ide-tape: Reached idetape_pc_intr interrupt handler ide-tape: The tape wants to send us more data than expected - allowing transfer ide-tape: Reached idetape_pc_intr interrupt handler Packet command completed, 22 bytes transferred ide-tape: Reached idetape_request_sense_callback ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1 Reached idetape_end_request rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0 sector: 0, nr_sectors: 0, current_nr_sectors: 0 ide-tape: ht0: I/O error, pc = 1a, key = 2, asc = 4, ascq = 1 ide-tape: Reached idetape_pc_callback Reached idetape_end_request ide-tape: Can't get tape parameters - assuming some default values bloxk_size=0,speed=0, buffer_size=0 ide-tape: hdd <-> ht0, 450KBps, 6*26kB buffer, 2600kB pipeline, 140ms tDSC Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html eth0: 3Com 3c900 Boomerang 10Mbps Combo at 0xd000, 00:60:08:06:b2:8d, IRQ 10 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10base2 interface. Enabling bus-master transmits and whole-frame receives. Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 hdb4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 36k freed Adding Swap: 130748k swap-space (priority -1) parport0: PC-style at 0x378, irq 7 [SPP,ECP,ECPEPP,ECPPS2] lp0: using parport0 (interrupt-driven). tty_io.c: process 289 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0 YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.16 detected OK (220) //------------------------------------------------------------------------- -- Mike Mangino Senior Programmer/Analyst mangino@cis.ohio-state.edu manginom@oclc.org Home: (614) 299-4322 Work: (614) 764-6280
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |