lkml.org 
[lkml]   [1999]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject(solved) Serial Problem in 2.2.0-pres
    Apparently, the recent 2.1.x kernels, and the 2.2.0-pres are less tolerent
    of serial ports using the same irq. After checking my inittab, and
    commenting out the getty that was sitting on ttyS3, all was well with
    ttyS1 again. All the 2.0.x kernels had no problems accessing ttyS1, with
    the getty running on ttyS3.

    My serial setup is as follows, ttyS3 has had no cable attached since I
    burnt out the vt320 that was attached to it. I had even forgot the getty
    was there. So if you having serial problems in the 2.2.0-pres, and not in
    2.0.x check your inittab, especially if you have a similar setup.

    ttyS00 at 0x03f8 (irq = 4) is a 16550A
    ttyS01 at 0x02f8 (irq = 3) is a 16550A
    ttyS03 at 0x02e8 (irq = 3) is a 16550A

    Thank you all for your help,
    Mr. Shannon Aldinger

    Mental Recursion: Out of Memory - Personality Dumped.
    ______________________________ ____________________________
    / Computer Science Student __/\ Class of /_ Primary Email Address: /\
    / Millersvile University /_ \/\ ?? __/ god@yinyang.hjsoft.com / /\
    /_____________________________/\ /___________________________/ /
    \_____________________________\/ Linux \___________________________\/
    \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 'nuff said \ \ \ \ \ \ \ \ \ \ \ \ \ \ \


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:49    [W:0.021 / U:0.832 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site