lkml.org 
[lkml]   [1998]   [Sep]   [7]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateMon, 07 Sep 1998 02:58:32 -0300
From"Garst R. Reese" <>
Subjectqlogic scsi & CardBus
This is on an IBM ThinkPad 380XD
The PCMCIA card reports RAVEN CD-Note 4X
I can insert the MegaHertz modem card and all is fine, but when I insert
the scsi card I get a hard lockup. It reports memory clean at
0xa0000000-0xa0ffffff
The logs show that sd_mod sr_mod and scsi_mod have loaded, but when it
starts to load qlogic_cs, it hangs solid and I have to power off to
restart. If I insert the modem card first, the e2fsck tells me to reboot
immediately :) I boot from a rescue disk and run e2fsk and it finds an
orphaned pid. If I insert the scsi card first, it hangs the same way,
but e2fsck cleans things up. So, it appears the the qlogic driver is not
supporting CardBus controllers. Any suggestions for a new scsi card? Or
a fix?
-- 
Garst
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/faq.html

\
 
 \ /
  Last update: 2005-03-22 12:44    [from the cache]
©2003-2008