Messages in this thread | | | Date | Fri, 25 Sep 1998 01:08:02 -0400 (EDT) | From | George <> | Subject | CD-ROM unit attention errors |
| |
It's a Redhat 5.0 CD I was browsing through picking RPMs from:
PIIX3: IDE controller on PCI bus 00 dev 39 PIIX3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 71000 A, ATA DISK drive hdb: CD820E.1v0789108, ATAPI CDROM drive hdc: IBM-DTTA-371010, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: Maxtor 71000 A, 958MB w/64kB Cache, CHS=1946/16/63, DMA hdc: IBM-DTTA-371010, 9641MB w/465kB Cache, CHS=19590/16/63, (U)DMA Partition check: hda: hda1 hda2 hda3 hda4 hdc: hdc1 hdc2 hdc3 hdc4 [..] hdb: ATAPI 8X CDROM drive, 240kB Cache Uniform CDROM driver Revision: 2.14 VFS: Disk change detected on device 03:40 ISO 9660 Extensions: RRIP_1991A hdb: timeout waiting for DMA hdb: irq timeout: status=0xd0 { Busy } hdb: DMA disabled hdb: ATAPI reset complete ATAPI device hdb: Error: Unit attention -- (Sense key=0x06) Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00) hdb: irq timeout: status=0xd0 { Busy } hdb: ATAPI reset complete end_request: I/O error, dev 03:40 (hdb), sector 860 ATAPI device hdb: Error: Unit attention -- (Sense key=0x06) Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00) hdb: irq timeout: status=0xd0 { Busy } hdb: ATAPI reset complete ATAPI device hdb: Error: Unit attention -- (Sense key=0x06) Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00) hdb: irq timeout: status=0xd0 { Busy } hdb: ATAPI reset complete ATAPI device hdb: Error: Unit attention -- (Sense key=0x06) Power on, reset or bus device reset occurred -- (asc=0x29, ascq=0x00)
Anything worth worrying about? First time the DMA has failed on it.
-George
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |