lkml.org 
[lkml]   [1998]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: G100 driver
Hello,
I promise that I'll work on G100/G200 driver as soon as
a) Matrox releases docs or
b) I'll get these devices into one of my boxes

Except that, matroxfb now works (tested) on Mystique, Millenium I and
Millenium II. Unfortunately, I've big lack of big-endian testers
(there were two, but I've no report from them), so I cannot say
anything about support on PowerMac.
(I promise that matroxfb will work on PowerMac as soon as somebody
delivers some PowerMac to my table, at the worst case :-) )

And on another note, friend of mine buyed SF64-PCE audio device
(Maestro-1, FM tuner) (PCI ID 0x1285/0x0100). I'm trying to get FM
tuner on that device to work, but if I switch device into
SBPro-compatible mode, I can play 8-bit /dev/dsp, but I'm not able
to find how to set volume for radio :-( (neither for radio nor for
anything - /dev/mixer does not work and sb.o complains that it
cannot believe that this device is SoundBlaster) And it seems that volume
for radio is set to 0 by default (I'm programming FM tuner as windows
do, but I hear no output). And last time I checked it, OSS does not
contain driver for this device. Is there anybody out who has access
to specs or to sound driver (for Linux...) ?
Best regards,
Petr Vandrovec
vandrove@vc.cvut.cz

P.S.: I read digest only, so if you want fast reply from me,
CC me.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:44    [W:0.150 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site