Messages in this thread | | | Date | Mon, 3 Aug 1998 12:34:13 -0500 (CDT) | From | "Andre M. Hedrick" <> | Subject | Re: !!Warning!! UDMA and Fujitsu HD |
| |
Apply this patch against hdparm-3.3, which I believe is Michel Aubry's handy work.
hdparm -i /dev/hda /dev/hda:
Model=QUANTUM FIREBALL SE8.4A, FwRev=APC.0B00, SerialNo=33871359 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4 BuffType=3(DualPortCache), BuffSize=80kB, MaxMultSect=16, MultSect=16 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast) CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16514064 tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1 mword2 IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4 UDMA modes:
hdparm -I /dev/hda /dev/hda: --------model =
Model=, FwRev=APC.0B00, SerialNo=33871359 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=32256, SectSize=512, ECCbytes=4 BuffType=3(DualPortCache), BuffSize=80kB, MaxMultSect=16, MultSect=16 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=2(fast) CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16514064 tDMA={min:120,rec:120}, DMA modes: sword0 sword1 sword2 mword0 mword1 mword2 IORDY=on/off, tPIO={min:120,w/IORDY:120}, PIO modes: mode3 mode4 UDMA modes: mode0 mode1 *mode2
Also get Andrew Balsa's Jumbo-9 for additional (U)DMA support under 2.0.35 and 2.0.36-1; however, we may not have the TX-Pro Chipset decoded yet............
Andrew, status TX-Pro???
On Mon, 3 Aug 1998, Peter T. Breuer wrote:
> I can also kind of confirm that. Likewise installed this weekend under > my good old 2.0.25 kernel. Noticed at once that hdparm -X34 hung the > machine and didn't try that again! It replaced a 3yr old seagate which > was running happily with those settings, and using them: > > Model=FUJITSU MPB3032ATU E, FwRev=4010, SerialNo=03117294 > Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } > RawCHS=6704/15/63, TrkSize=0, SectSize=0, ECCbytes=4 > BuffType=0(?), BuffSize=0kB, MaxMultSect=16, MultSect=off > DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=0(slow) > CurCHS=6704/15/63, CurSects=6335280, LBA=yes, LBAsects=6335280 > tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2 > IORDY=yes, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
[unhandled content-type:application/octet-stream]
| |