Messages in this thread | | | Date | Wed, 26 Aug 1998 16:06:34 +0200 | From | Janos Farkas <Janos.Farkas-nouce/priv-#1xx/SZ9Qwtgy2hvOIojVors/> | Subject | ide-scsi multiplies cd-roms for quite some time... |
| |
For some months, the kernel thinks I have eight times more CD-ROM's than in reality, and finally I had a bit of time to even report it... The hw setup is not really unique, just a single ATAPI cd-rom on a different channel than a single IDE hard disk. The scsi core is compiled in, but ide-scsi, cdrom, and sr_mod are loaded as modules.
On module load, I get the following:
Aug 26 14:42:01 distance kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Aug 26 14:42:01 distance kernel: scsi : 1 host. Aug 26 14:42:01 distance kernel: Vendor: MATSHITA Model: CD-ROM CR-583 Rev: 1.05 Aug 26 14:42:01 distance kernel: Type: CD-ROM ANSI SCSI revision: 02 Aug 26 14:42:01 distance kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Aug 26 14:42:01 distance kernel: Vendor: MATSHITA Model: CD-ROM CR-583 Rev: 1.05 Aug 26 14:42:01 distance kernel: Type: CD-ROM ANSI SCSI revision: 02 Aug 26 14:42:01 distance kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
...etc, you get the picture..
Aug 26 14:42:01 distance kernel: Vendor: MATSHITA Model: CD-ROM CR-583 Rev: 1.05 Aug 26 14:42:01 distance kernel: Type: CD-ROM ANSI SCSI revision: 02 Aug 26 14:42:01 distance kernel: Detected scsi CD-ROM sr7 at scsi0, channel 0, id 0, lun 7 Aug 26 14:42:01 distance kernel: sr0: scsi3-mmc drive: 8x/8x xa/form2 cdda tray Aug 26 14:42:01 distance kernel: Uniform CDROM driver Revision: 2.13 Aug 26 14:42:01 distance kernel: sr1: scsi3-mmc drive: 8x/8x xa/form2 cdda tray Aug 26 14:42:01 distance kernel: sr2: scsi3-mmc drive: 8x/8x xa/form2 cdda tray Aug 26 14:42:01 distance kernel: sr3: scsi3-mmc drive: 8x/8x xa/form2 cdda tray Aug 26 14:42:01 distance kernel: sr4: scsi3-mmc drive: 8x/8x xa/form2 cdda tray Aug 26 14:42:01 distance kernel: sr5: scsi3-mmc drive: 8x/8x xa/form2 cdda tray Aug 26 14:42:01 distance kernel: sr6: scsi3-mmc drive: 8x/8x xa/form2 cdda tray Aug 26 14:42:01 distance kernel: sr7: scsi3-mmc drive: 8x/8x xa/form2 cdda tray
What could cause this? I looked back in the logs, and it seems it happened to me first back in January, with 2.1.79. The boot before that was with 2.1.75, and that did not do this. On another host with multiple ATAPI devices, this doesn't happen either, not even with recent kernels.
-- Janos - Don't worry, my address is real. I'm just bored of spam.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |