Messages in this thread | | | Date | Fri, 21 Aug 1998 00:14:52 +0200 (CEST) | From | ferraris@biella ... | Subject | Intel 440LX+NCR53C810 trouble |
| |
Sorry for the trouble and my beastly English. The problem is that I can't use my old and good NCR53C810 and the HP SCSI II disk connected neither with W95 (and that's not a problem) neither with Linux 2.0.35 (that's the problem). They worked properly whith my old ALI14XX matherboard and a AMD486/100. Now they are on an Intel 440LX and a PII/233 with a bios recently flash upgraded. Windoze says that the controller would use memory reserved by bios to plug and play extension (although I disabled in bios setup plug & play OS, because Linux is my main OS). To avoid any conflicts I removed from the matherboard all the boards but the video and the ncr ones.
The boot mesages, /proc/pci, /proc/interrupts, /proc/ioports are:
Aug 20 22:28:29 localhost syslogd 1.3-3: restart. Aug 20 22:28:29 localhost kernel: klogd 1.3-3, log source = /proc/kmsg started. Aug 20 22:28:29 localhost kernel: Cannot find map file. Aug 20 22:28:29 localhost kernel: No module symbols loaded. Aug 20 22:28:29 localhost kernel: Console: 16 point font, 400 scans Aug 20 22:28:29 localhost kernel: Console: colour VGA+ 80x25, 1 virtual console (max 63) Aug 20 22:28:29 localhost kernel: pcibios_init : BIOS32 Service Directory structure at 0x000f7540 Aug 20 22:28:29 localhost kernel: pcibios_init : BIOS32 Service Directory entry at 0xfd740 Aug 20 22:28:29 localhost kernel: pcibios_init : PCI BIOS revision 2.10 entry at 0xfd943 Aug 20 22:28:29 localhost kernel: Probing PCI hardware. Aug 20 22:28:29 localhost kernel: Calibrating delay loop.. ok - 232.65 BogoMIPS Aug 20 22:28:29 localhost kernel: Memory: 63412k/65536k available (576k kernel code, 384k reserved, 1164k data) Aug 20 22:28:29 localhost kernel: Swansea University Computer Society NET3.035 for Linux 2.0 Aug 20 22:28:29 localhost kernel: NET3: Unix domain sockets 0.13 for Linux NET3.035. Aug 20 22:28:29 localhost kernel: Swansea University Computer Society TCP/IP for NET3.034 Aug 20 22:28:29 localhost kernel: IP Protocols: ICMP, UDP, TCP Aug 20 22:28:29 localhost kernel: Checking 386/387 coupling... Ok, fpu using exception 16 error rep orting. Aug 20 22:28:29 localhost kernel: Checking 'hlt' instruction... Ok. Aug 20 22:28:29 localhost kernel: Linux version 2.0.35 (root@localhost.localdomain) (gcc version 2. 7.2.3) #1 Tue Aug 18 02:40:46 CEST 1998 Aug 20 22:28:29 localhost kernel: Starting kswapd v 1.4.2.2 Aug 20 22:28:29 localhost kernel: Serial driver version 4.13 with no serial options enabled Aug 20 22:28:29 localhost kernel: tty00 at 0x03f8 (irq = 4) is a 16550A Aug 20 22:28:29 localhost kernel: tty01 at 0x02f8 (irq = 3) is a 16550A Aug 20 22:28:29 localhost kernel: APM BIOS version 1.2 Flags 0x03 (Driver version 1.2) Aug 20 22:28:29 localhost kernel: Entry f000:61bb cseg16 f000 dseg 40 cseg len ffff, dseg len f fff Aug 20 22:28:29 localhost kernel: Connection version 1.1 Aug 20 22:28:29 localhost kernel: AC on line, battery status unknown, battery life unknown Aug 20 22:28:29 localhost kernel: battery flag 0x80, battery life unknown Aug 20 22:28:29 localhost kernel: Real Time Clock Driver v1.09 Aug 20 22:28:29 localhost kernel: ide: i82371 PIIX (Triton) on PCI bus 0 function 57 Aug 20 22:28:29 localhost kernel: ide0: BM-DMA at 0xfcd0-0xfcd7 Aug 20 22:28:29 localhost kernel: ide1: BM-DMA at 0xfcd8-0xfcdf Aug 20 22:28:29 localhost kernel: hda: FUJITSU MPB3032ATU, 3093MB w/0kB Cache, CHS=785/128/63, UDMA Aug 20 22:28:29 localhost kernel: hdc: SAMSUNG WN321620A (2.16 GB), 2060MB w/109kB Cache, CHS=4186/ 16/63, DMA Aug 20 22:28:29 localhost kernel: hdd: MATSHITA CR-585, ATAPI CDROM drive Aug 20 22:28:29 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Aug 20 22:28:29 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 Aug 20 22:28:29 localhost kernel: md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8 >> Aug 20 22:28:29 localhost kernel: ncr53c8xx: at PCI bus 0, device 6, function 0 >> Aug 20 22:28:29 localhost kernel: ncr53c8xx: not initializing, both I/O and memory mappings disabled >> Aug 20 22:28:29 localhost kernel: scsi : 0 hosts. >> Aug 20 22:28:29 localhost kernel: scsi : detected total. Aug 20 22:28:29 localhost kernel: Partition check: Aug 20 22:28:29 localhost kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > Aug 20 22:28:29 localhost kernel: hdc: [PTBL] [523/128/63] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 > Aug 20 22:28:29 localhost kernel: VFS: Mounted root (ext2 filesystem) readonly. Aug 20 22:28:29 localhost kernel: Adding Swap: 40284k swap-space (priority -1) Aug 20 22:28:29 localhost kernel: Adding Swap: 44316k swap-space (priority -2)
[root@localhost /usr]# cat /proc/pci PCI devices found: Bus 0, device 13, function 0: VGA compatible controller: ATI Mach64 GT (Rage II) (rev 154). Medium devsel. Fast back-to-back capable. IRQ 255. Master Capable. Latency=66. Min Gnt=8. Non-prefetchable 32 bit memory at 0xfd000000. I/O at 0xf800. Non-prefetchable 32 bit memory at 0xfedff000. Bus 0, device 7, function 3: Bridge: Intel 82371AB PIIX4 ACPI (rev 1). Medium devsel. Fast back-to-back capable. Bus 0, device 7, function 2: USB Controller: Intel 82371AB PIIX4 USB (rev 1). Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. I/O at 0xfce0. Bus 0, device 7, function 1: IDE interface: Intel 82371AB PIIX4 IDE (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. I/O at 0xfcd Bus 0, device 7, function 0: ISA bridge: Intel 82371AB PIIX4 ISA (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 6, function 0: Non-VGA device: NCR 53c810 (rev 1). Medium devsel. Master Capable. No bursts. I/O at 0xff00. Non-prefetchable 32 bit memory at 0xff00. Bus 0, device 1, function 0: PCI bridge: Intel 440LX - 82443LX PAC AGP (rev 3). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. Bus 0, device 0, function 0: Host bridge: Intel 440LX - 82443LX PAC Host (rev 3). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Prefetchable 32 bit memory at 0xf8000000.
[root@localhost /proc]# cat /proc/interrupts 0: 221361 timer 1: 5274 keyboard 2: 0 cascade 3: 9852 + serial 8: 1 + rtc 12: 28357 PS/2 Mouse 13: 1 math error 14: 18803 + ide0 15: 1452 + ide1
[root@localhost /proc]# cat ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-009f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : npu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) fcd0-fcd7 : IDE DMA fcd8-fcdf : IDE DMA
I'd like to know if there are some means to make working my NCR810 on that board.
Regards and thanks if someone can help.
Andrea
---------------------------------- Home e-mail: ferraris@biella.alpcom.it Work: eita.teiafer@memo.ericsson.se 20-Aug-98 22:36:01
This message was sent by XFMail ----------------------------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |