Messages in this thread | | | Date | Tue, 28 Jul 1998 19:59:39 -0400 | From | Mark Lord <> | Subject | Re: hda = IDE Zip and many probs |
| |
Nomad the Wanderer wrote: > > Ok, > I just moved my CDRom to the first/only device on my second ide > controller, and installed a IDE/ATAPI Zip as the first/only device on > the first controller. However, whenever it tries to access the device > I get this: > > ide-floppy: hda: I/O error, pc = 0, key = 2, asc = 30, ascq = 0 > ide-floppy: hda: I/O error, pc = 1b, key = 2, asc = 30, ascq = 0 > hda: The drive reports both 100663296 and 0 bytes as its capacity > ide-floppy: hda: I/O error, pc = 0, key = 2, asc = 30, ascq = 0 > ide-floppy: hda: I/O error, pc = 1b, key = 2, asc = 30, ascq = 0 > hda: The drive reports both 100663296 and 0 bytes as its capacity > > And I can't fdisk the drive as it says it can't open the device. > > I've compiled in support for IDE/ATAPI Floppy. This is kernel > 2.1.109. > > Any Ideas?
Yeah, There is no disk in the drive. -- mlord@pobox.com The Linux IDE guy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |