Messages in this thread | | | From | peloy@ven ... | Subject | Re: 2.1.110 and NCR driver | Date | 21 Jul 1998 13:26:46 GMT |
| |
Hi there,
I can confirm this problem. 2.1.109 and before was OK but can't boot 2.1.110 because the hard disk is controlled by a NCR53c810, a nothing is detected at boot time.
I can try any patches anyone wants to send.
My kernel messages are very similar to Richard's.
Regards,
Eloy.-
Richard Gooch <rgooch@workaholix.atnf.CSIRO.AU> wrote: > Hi, all. I just tried 2.1.110 on a machine with the NCR 53c810 SCSI > card, and I get the following messages: > > ncr53c8xx: at PCI bus 0, device 16, function 0 > ncr53c8xx: 53c810 detected > ncr53c810-0: rev=0x02, base=0xe4000000, io_port=0x6500, irq=9 > ncr53c810-0: can't map memory mapped IO region > ncr53c810-0: detaching > > and since the root FS is accessed through this controller, the machine > is rooted :-( :-( > > On the other hand, with 2.1.104, I get the following: > > ncr53c8xx: at PCI bus 0, device 16, function 0 > ncr53c8xx: 53c810 detected > ncr53c810-0: rev=0x02, base=0xe4000000, io_port=0x6500, irq=9 > ncr53c810-0: ID 7, Fast-10, Parity Checking > ncr53c810-0: restart (scsi reset). > scsi0 : ncr53c8xx - revision 2.5f > scsi : 1 host. > > which is definately preferred! Note that 2.1.110 has revision 3.0g of > the NCR driver. > > Regards, > > Richard.... >
--
Eloy A. Paris Information Technology Department Rockwell Automation Venezuela Telephone: +58-2-9432311 Fax: +58-2-9431645
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html
| |