Messages in this thread | | | From | Jochen Heuer <> | Subject | Re: AHA-1510a supported? | Date | Fri, 19 Jun 98 9:40:17 METDST |
| |
Hi,
> On Thu, 18 Jun 1998, Jochen Heuer wrote: > > > If I load the needed modules by doing _modprobe aha152x aha152x=0x340_ > > the controller is found but not the attached cdrom. Here comes some > > output from syslog: > > Just a wild guess, but do you have the scsi CD-ROM module (sr_mod) loaded?
I don't think this is needed for the cdrom to be seen in /proc/scsi/scsi.
> That, along with a rescanning of the scsi bus should get you going. You > can also use the
I always thought that the adapter scans the bus when it is inserted.
> echo "scsi add-single-device <host> <channel> <id> <lun>" > \ > /proc/scsi/scsi > > hack as documented in linux/drivers/scsi/scsi.c to manually add the > cdrom, or hack /etc/conf.modules to insert the sr_mod module after > installing aha152x.
This does not help bringing the cdrom to life either :( I tried it with every id...
Regards,
Jogi
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
| |