lkml.org 
[lkml]   [1998]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: ext2 fs not properly updated upon dismount.
From
Date
"Richard B. Johnson" <root@chaos.analogic.com> writes:

> Here is an update. It might point to the problem. If I don't set up
> a swap drive, the problem doesn't occur. My swap partition is /dev/sdc2,
> not shared with anything, while my root file-system is /dev/sdc1.

> Device Boot Begin Start End Blocks Id System
> /dev/sdc1 * 1 1 255 2048256 83 Linux native
> /dev/sdc2 256 256 288 265072+ 83 Linux native
> /dev/sdc3 289 289 553 2128612+ 83 Linux native

Try setting the Id of /dev/dsc2 to 82, Linux swap instead of 83, Linux
native. Perhaps mkswap'ing it afterwards is a good idea, too.

--
Regards, Anders <URL:http://www.kampsax.dtu.dk/~and/>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:43    [W:1.675 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site