lkml.org 
[lkml]   [1998]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.1.10[56] parallel port problems
On Tue, 16 Jun 1998, Henrik Storner wrote:

> In 2.1.105 and .106, printing is essentially broken for me. It seems
> as if "flow control" does not work - the print-outs I get have missing
> lines, garbled data and look just plain awful. Oddly, there seems to
> be no errors, warnings or other messages logged anywhere - as far as
> Linux and lpd are concerned, everything looks fine and dandy.


> Log messages when the module loads:
> parport0: PC-style at 0x378 [SPP,PS2,EPP]
> parport0: no IEEE-1284 device present.
> lp0: using parport0 (polling).

Have you tried adding the irq= option to the options string for the
parport_pc driver? Tell it the IRQ, then try again. It may work. (Of
course it may not - no warranties here. :)

Derrik Pates
dpates@kalifornia.com
dpates@acm.org


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:43    [W:0.046 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site