lkml.org 
[lkml]   [1998]   [Jun]   [10]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateWed, 10 Jun 1998 18:05:26 +0200
FromBart Schuller <>
SubjectRe: BTTV w/ no sound?
Hi,

It seems an earlier mail on this subject never made it through the list.
I also get the read and write errors from the msp3400, but they
disappear when I first use the card under windows.

I just noticed that the messages also differ. Notice the chip=MSP3400@-@0.
Wrong:

    Linux video capture interface: v0.01 ALPHA 
    i2c: initialized (i2c bus scan enabled) 
    i2c: driver registered: tuner 
    i2c: driver registered: msp3400 
    bttv: Brooktree Bt848 (rev 18) bus: 0, devfn: 88, ir q: 11, memory: 0xe4000000. 
    bttv: 1 Bt848 card(s) found. 
    bttv: model: HAUPPAUGE 
    i2c: bus registered: bt848-0 
    i2c: scanning bus bt848-0: found device at addr=0x80 
    i2c: scanning bus bt848-0: found device at addr=0xa0 
    i2c: scanning bus bt848-0: found device at addr=0xc2 
    i2c: device attached: tuner (addr=0xc2, bus=bt848-0, driver=tuner) 
    msp3400: I/O error, trying reset (write Audio 0x9)
    msp3400: I/O error, trying reset (write Audio 0x1) 
    msp3400: I/O error, trying reset (write Audio 0x3) 
    msp3400: I/O error, trying reset (read Audio 0x1e) 
    msp3400: I/O error, trying reset (read Audio 0x1f) 
    msp3400: init: chip=MSP3400@-@0, registered as sound mixer 
    i2c: device attached: MSP3400@-@0 (addr=0x80, bus=bt848-0, driver=msp3400) 
Same hardware, but now working (i.e. windows booted earlier)

    Linux video capture interface: v0.01 ALPHA
    i2c: initialized (i2c bus scan enabled)
    i2c: driver registered: tuner
    i2c: driver registered: msp3400
    bttv: Brooktree Bt848 (rev 18) bus: 0, devfn: 88, irq: 11, memory: 0xe4000000.
    bttv: 1 Bt848 card(s) found.
    bttv: model: HAUPPAUGE
    i2c: bus registered: bt848-0
    i2c: scanning bus bt848-0: found device at addr=0x80
    i2c: scanning bus bt848-0: found device at addr=0xa0
    i2c: scanning bus bt848-0: found device at addr=0xc2
    i2c: device attached: tuner (addr=0xc2, bus=bt848-0, driver=tuner)
    msp3400: init: chip=MSP3400C-C6, registered as sound mixer
    i2c: device attached: MSP3400C-C6 (addr=0x80, bus=bt848-0,
    driver=msp3400)
-- 
The idea is that the first face shown to people is one they can readily
accept - a more traditional logo. The lunacy element is only revealed
subsequently, via the LunaDude. [excerpted from the Lunatech Identity Manual]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 12:43    [from the cache]
©2003-2008