lkml.org 
[lkml]   [1998]   [Jun]   [10]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateTue, 9 Jun 1998 23:41:49 -0600
FromErik Andersen <>
SubjectRe: BTTV w/ no sound?
On Mon, Jun 08, 1998 at 09:34:13AM +0100, Alan Cox wrote:
> > And this works just fine -- except for the sound. As I said, the radio
> > works just fine (as do all other sound things) so it isn't the kernel
> > sound drivers.  Anybody know what I am doing wrong? 
> 
> Do you have an MSCP3400 on your board ?
> 
> Alan

I am not sure.  How would I check?  (A few minutes later after turning off my
computer, and pulling the card).

Ok, my card has a magic silver box with the label:
WinCast/TV
NTSC
60171 Rev C 1V

In addition, it has the following two chips on it:
BT				    ITT
B848KPF				    MSP3430G-PS-A1
Video Decoder			    23-WN-FA
BF4260.3			    063876.005
9803				    8136.
Korea

BTW, I just did some playing with params, and now I see:

Linux video capture interface: v0.01 ALPHA
i2c: initialized
bttv: Brooktree Bt848 (rev 18) bus: 0, devfn: 88, irq: 9, memory: 0xe1004000.
bttv: 1 Bt848 card(s) found.
bttv: model: HAUPPAUGE
i2c: bus registered: bt848-0
i2c: driver registered: msp3400
msp3400: I/O error, trying reset (write Demod 0x1)
msp3400: I/O error, trying reset (write Demod 0x1)
msp3400: I/O error, trying reset (write Demod 0x1)
msp3400: I/O error, trying reset (write Demod 0x5)
msp3400: I/O error, trying reset (write Demod 0x5)
msp3400: I/O error, trying reset (write Demod 0x5)
msp3400: I/O error, trying reset (write Demod 0x5)
msp3400: I/O error, trying reset (write Demod 0x5)
msp3400: I/O error, trying reset (write Demod 0x93)
msp3400: I/O error, trying reset (write Demod 0xa3)
msp3400: I/O error, trying reset (write Audio 0x8)
msp3400: I/O error, trying reset (write Audio 0xa)
msp3400: I/O error, trying reset (write Audio 0x0)
msp3400: I/O error, trying reset (write Audio 0x7)
msp3400: I/O error, trying reset (write Audio 0x2)
msp3400: I/O error, trying reset (read Audio 0x1e)
msp3400: I/O error, trying reset (read Audio 0x1f)
msp3400: init: chip=MSP3400@-@0, registered as sound mixer
i2c: device attached: MSP3400@-@0 (addr=0x80, bus=bt848-0, driver=msp3400)
[----------errors snipped-------------]
i2c: driver registered: tuner
i2c: device attached: tuner (addr=0xc2, bus=bt848-0, driver=tuner)
 -Erik

--
Erik B. Andersen   Web:    http://www.inconnect.com/~andersen/ 
                   email:  andersee@debian.org
--This message was written using 73% post-consumer electrons--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 12:43    [from the cache]
©2003-2008